The country of origin of a desktop waterjet cutting machine
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated May 27, 2025, you requested a country of origin ruling on a desktop waterjet cutting machine on behalf of your client, Wazer, Inc. Technical information was submitted with your request. The item under consideration is described as a desktop waterjet cutting machine that cuts a variety of materials into precise, user-determined shapes using a high-pressure stream of water and abrasive materials.
The stream is delivered through a nozzle as directed by onboard software processing by a printed circuit board assembly (PCBA) based on schematic information uploaded by a user. As you described, the waterjet cutting machine comprises two interconnected subassemblies: the waterjet cutter main unit and the waterjet cutter pump box. These two subassemblies contain several key subcomponents and incorporate firmware and web access management (WAM) software.
The primary controller PCBA handles all processing for the machine, which includes translating a user’s schematic files and incorporating the input from dozens of sensors to precisely control the machine’s actions. The user interface (UI) controller assembly includes a PCBA, a display, and buttons which transmit input signals from the user to the primary controller PCBA during setup, operation, and maintenance.
In addition, the high-pressure pump pressurizes the waterjet cutting spray that forces it through the nozzle assembly. The drivetrain comprises the components that power the pump as directed by the primary controller PCBA.
The nozzle assembly includes a jeweled orifice that the pressurized water is forced through for conversion into a high velocity stream, a chamber that draws in abrasive material and mixes it with the water stream, and a carbide mixing tube that focuses and ejects the formed slurry onto the workpiece for cutting. The gantry moves the nozzle assembly in various directions as desired using stepper motors, gears, and belts.
The abrasive hopper assembly stores dry abrasive and includes a valve to start and stop the flow of abrasive into the nozzle assembly. Additionally, there is a tank assembly that serves as the repository for liquid and used abrasive material during cutting. This assembly includes sensors, low pressure pumps and a valve that moves the used material out of the machine for drainage.
In your letter, you state that both the primary controller PCBA and the UI controller PCBA are loaded with unique firmware that controls their functions. Finally, there is also proprietary WAM software that allows users to manipulate and convert information from other design programs for use with the waterjet cutting machine. In subsequent correspondence, you confirmed that the waterjet cutting machine is completely incapable of cutting as a hand-held tool or with any sort of hand-held attachment.
You also assert that the waterjet cutting machine is a computer numerical control (CNC) machine and dependent on the firmware, software, and PCBAs for operation. Based on the submitted information, the waterjet machine is manufactured in China using predominantly Chinese-origin components and PCBAs from Vietnam or Malaysia.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349481).