The country of origin of a temperature and pressure sensor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 6, 2025, you requested a country of origin ruling on a temperature and pressure sensor. Descriptive literature was provided for our review. The item under consideration is described as an automotive temperature and manifold absolute pressure (MAP) sensor (model number 20070046).
The sensor measures the temperature in the engine as well as the pressure within the engine’s intake manifold, which in turn provides information to the engine control unit (ECU) for optimal fuel delivery and ignition timing. In operation, the sensor measures the absolute pressure within the intake manifold, which is the pressure of the air entering the engine cylinders. This pressure information is then sent to the ECU as a voltage or frequency signal.
The ECU uses the signal to determine the appropriate amount of fuel to inject and the correct ignition timing for optimal engine performance. The automotive temperature and MAP sensor includes a Chinese origin sensor head frame, which is the physical housing that encases the sensing components of the sensor, provides protection, and allows for the mounting of the various components.
The pins, which serve as the essential connection points that enable both electrical and mechanical connections are also housed within the frame. The components from Thailand include the thermistor, printed circuit board assembly, glue, cover and O-ring. The manufacturing process begins in Thailand with the creation of the printed circuit board assembly using surface mount technology. Next, the thermistor is soldered to the board and the terminal is added.
Then, the Chinese produced sensor head frame and other Thailand produced injection molded components are hot melted around the circuit board. The semi-finished product is then tested before the cover is glued into place. The O-rings are then added before the final performance testing, appearance inspection, and laser batching. Finally, the finished sensors are packaged for final shipment. When determining the country of origin, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). In regard to the country of origin of the automotive temperature sensors, it is our opinion the Chinese sensor head frame is transformed in Thailand from an article of plastic to a complete automotive temperature and MAP sensor.
The creation of the PCBA in Thailand using surface mount technology, along with the addition of the thermistor and other Thailand origin components transforms the Chinese sensor head frame into a new product having a distinctive name, character, and use.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349893).