The country of origin of pressure sensors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 8, 2025, you requested a country of origin ruling on pressure sensors. The first item under consideration is the SA87A pressure sensor. The SA87A sensor consists of gold-plated electrical terminals, O-rings, a stainless steel or nickel alloy isolation diaphragm, a silicone pressure die, glass substrate, and a stainless-steel or nickel alloy body. In operation, pressure is applied to the metal isolation diaphragm.
The addition of oil transfers pressure to the pressure die, which deflects under pressure causing electrical resistance changes in strain gauges. The Wheatstone bridge, an electrical circuit used to precisely measure unknown resistances by balancing two voltage divider networks, is formed by the strain gauges giving a voltage output in response to the resistance changes, thus establishing a relationship of voltage output versus pressure.
The strain gauge signal is detected through the electrical terminals which are fused to the body with glass insulation. The signal can be used as is, normalized by additional external resistors, or additional circuits can be added for amplified output. The second item under consideration is the SAGF100 pressure sensor.
The SAGF100 pressure sensor consists of silicon strain gauges, a stainless-steel header with electrical terminals, a wire bond printed circuit board (PCB), a strain gauge bonding agent, and a pressure port with integrated diaphragm. In operation, pressure is applied to the metal diaphragm through the pressure port. Strain gauges deflect together with the diaphragm causing electrical resistance changes in the strain gauges.
The Wheatstone bridge is then formed by the strain gauges giving a voltage output in response to the resistance changes, establishing a relationship of voltage versus pressure. Next, the strain gauge signal is detected through the electrical terminals. Similar to the first sensor, the signal can be used as is, normalized by additional external resistors, or additional circuits can be added for amplified output. In your letter, you identify two manufacturing scenarios for each sensor.
For the SA87A pressure sensor, materials are gathered from China, Japan, and the United States. The Chinese components include the cable assembly, PVC retaining nut, epoxy resin, housing, PCBA, O-ring, gilled gel silicone, connecting flexible printed circuit (FPC), sealing ball, header, gold wire, and diaphragm. The oil is from Japan while the silicone and die are produced in the United States.
In the first scenario for the SA87A pressure sensor, the process begins in the United States with the creation of the wafers. The MEMS pressure sensor die is attached to the header that includes the strain gauges, membrane, and supporting structure. The next step includes wire bonding the MEMS pressure sensor die to the pins in the header. This is followed by wafer dicing to break the wafer into individual pressure dies.
The manufacturing process then shifts to China where a worker glues the die to the glass using room temperature vulcanizing (RTV), a liquid silicone compound that cures at room temperature into a flexible rubber and is commonly used as an adhesive.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N349940).