The country of origin of carbide hole saws
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your submission dated June 10, 2025, you requested a country of origin ruling for purposes of Section 301 duties, IEEPA tariffs and marking. Pictures and descriptions of the manufacturing processes were included in your submission. The products under consideration are carbide hole saws of various diameters. Each hole saw consists of a steel body with tungsten carbide tipped teeth. The other end of the hole saw incorporates a cap and adaptor.
The adaptor enables the hole saw to connect to the mandrel system of a power tool. You have stated that your company plans to assemble the subject carbide hole saws in Switzerland, the United States, and China under 5 production scenarios. Under the first 4 production scenarios, your company will purchase steel strip material on coil from Germany or Austria and manufacture the carbide hole saws as follows: Production Scenario 1: In Switzerland, saw teeth are milled or laser cut into the steel strip coil.
Tungsten carbide tips are then welded to the teeth, and the tungsten carbide tips are ground into their final cutting shape. The product is then sent to China for final finishing. This includes bending the carbide-tipped teeth to the left and to the right, punching slots into the sides of the saw blade strip, and punching the saw blade strip to its correct length, depending on the diameter of the hole saw. The saw blade is then rolled and formed to become round, and it is heat-treated.
Next, the ends of the rolled body are welded together, and the body and the cap are welded together along with the adaptor. The hole saw is then painted, tempered, treated with rust protection oil and brand information is printed on the body. Finally, the finished hole saw is packaged for export to the United States. Production Scenario 2: In Switzerland, saw teeth are milled or laser cut into the steel strip coil.
Tungsten carbide tips are then welded to the teeth, and the tungsten carbide tips are ground into their final cutting shape. The carbide-tipped teeth are also bent to the left and to the right. The article is then sent to China for final finishing. In China, slots are punched into the sides of the saw blade strip and the strips are punched to the correct length, depending on the diameter of the hole saw. The saw blade is then rolled and formed to become round, and it is heat-treated.
Next, the ends of the rolled body are welded together, and the body and the cap are welded together along with the adaptor. The hole saw is then painted, tempered, treated with rust protection oil and brand information is printed on the body. Finally, the finished hole saw is packaged for export to the United States. Production Scenario 3: In Switzerland, saw teeth are milled or laser cut into the steel strip coil.
Tungsten carbide tips are then welded to the teeth, and the tungsten carbide tips are ground into their final cutting shape. The carbide-tipped teeth are also bent to the left and to the right. Slots are punched into the sides of the saw blade strip and the strips are punched to the correct length, depending on the diameter of the hole saw. The article is then sent to China for final finishing.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350001).