The country of origin of an exhaust manifold catalytic converter assembly
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 11, 2025, on behalf of your client, Hyundai Motor Company, you requested a country of origin ruling on an exhaust manifold catalytic converter assembly. Descriptive literature was provided for our review. The item under consideration is described as an exhaust manifold catalytic converter assembly (part number 285102GAV0), which is mounted on the cylinder head of an automobile engine.
The device performs the function of cooling and expanding the high-temperature, high-pressure exhaust gases generated by automobiles into a low-temperature, low-pressure state, thereby purifying the exhaust gases and directing the gas flow safely. The item is designed to be directly bolted to the cylinder head of an automobile engine. The exhaust manifold catalyst assembly measures 327 mm wide by 300.34 mm long by 256.14 mm high and weighs 6.37 kg.
The exhaust manifold catalyst assembly is made from seven core components.
The Korean components include the manifold assembly (guides high-temperature exhaust gases generated from the engine cylinder toward the catalyst); the shell (wraps and secures the internal catalyst and the supporter, and guides exhaust gases to flow through the correct path); the upper cover and the lower covers (protect surrounding components from heat, also securing the shell, the internal catalyst, and the supporter); the supporter (located around the catalyst, it absorbs shocks and secures its position, while also blocking heat transfer to the outside); and the RR cone sub (maintains airtightness at the connection point with the rear muffler to prevent exhaust gas leaks).
The catalyst, which is manufactured in the United States, performs the role of purifying Carbon Monoxide (CO), Hydrocarbons (HC), and Nitrogen Oxides (NOx) in exhaust gases through oxidation and reduction reactions. The U.S. made catalyst makes up 77.3% of the overall material cost of the exhaust manifold catalytic converter assembly. The manufacturing process begins in the United States with the production of the catalyst through a ten-step process.
First, precisely measured refined clay, alumina, and other ceramic powder raw materials are mixed with water, dispersants, etc., to produce a uniform dough. Then the dough is put into an extruder to form the honeycomb cell structure of the substrate. The extruded long honeycomb-shaped substrate is then cut into uniform lengths.
The cut substrate undergoes moisture removal in a drying machine before being placed into a high-temperature kiln to bind the ceramic particles together, forming a porous honeycomb structure. Next, the precious metals (Platinum, Palladium, Rhodium) used as active components of the catalyst, are received in powder form and reacted in a special solvent to dissolve it and produce a uniform precious metal solution.
In the next step, a uniform washcoat slurry is prepared by mixing high-surface-area oxide powder with purified water and additives. A catalyst slurry is prepared by mixing the precious metal solution with the washcoat in slurry form.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350063).