The country of origin of a multimeter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the SDT-830C handheld digital multimeter will be Vietnam, which is where the PCBA creation and programming occurs.
Ruling text
In your letter dated June 12, 2025, on behalf of your client, Shanghai SDAR Electronic Instruments Co., Ltd., you requested a country of origin ruling on a multimeter. Descriptive literature was provided for our review. The item under consideration is described as the SDT-830C handheld digital multimeter, which is an electronic instrument that measures AC/DC voltage, current, and resistance.
In operation, the user selects the desired measurement function (voltage, current, resistance, etc.) using the rotary dial on the multimeter. The black probe is connected to the common terminal, while the red probe is connected to the appropriate terminal depending on the measurement function selected. To measure the voltage, the multimeter is connected in parallel with the component or circuit being tested.
The multimeter measures the potential difference between two points and displays the reading on the LCD screen. To measure the current, the multimeter is connected in series with the circuit so that the current flows through the meter. An internal shunt resistor is used to measure the voltage drop across the resistor, and the current is calculated using Ohm’s Law. To measure the resistance, a known current is forced through the component being measured, and the voltage drop is measured.
Ohm’s Law (the relationship between voltage, current, and resistance in an electrical circuit) is then used to calculate the resistance. The SDT-830C, as a digital multimeter, uses an Analog-to-Digital Converter to convert the measured electrical signals into a digital value, which is then displayed on the LCD screen. The SDT-830C is made of a printed circuit board assembly (PCBA), LCD display, rotary selector switch, input and output jacks, and a molded plastic housing.
Once fully assembled, the device is used by electricians and technicians for precision electrical measurements. In Vietnam, the PCBA is constructed using surface-mount technology (SMT). The process involves placing and soldering hundreds of various components onto the printed circuit board (PCB). Bare semiconductor dies are bonded and wire-connected under epoxy encapsulation, and larger through-hole parts are hand-inserted and soldered.
Once complete, the software programs are uploaded to the PCBA boards, which are then functionally tested. The completed Vietnamese PCBA is then shipped to China where it is installed into a Chinese-origin plastic housing. Additional Chinese components, including the LCD displays, selector knobs, and connectors are also installed at this time. Finally, silk printing is performed on the final product before packaging and shipping to the United States.
When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350166).