The country of origin of a digital blood pressure monitor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- As such, the country of origin for the subject blood pressure monitor will be Cambodia.
Ruling text
In your letter dated June 16, 2025, you requested a country of origin ruling on a digital blood pressure monitor on behalf of Fortunit Creative Co., LTD. The product under consideration is an Arm-type Fully Automatic Blood Pressure Monitor (Model # DBP-1359). It consists of a motherboard (chip-on-board/COB), an air pump, a pressure sensor (pressure transducer), two valves, an LCD display, a cuff (composed of an arm cuff, an air tube, and an air plug), a lower cover, an upper cover, and other components.
The following components are produced in China: silicone tube, O-type ring, cushion, zebra paper, pressure transducer, 12 cm wire, DC outlet PCB (printed circuit board), button PCB, metal dome, arm-type pump, reeds, screws, arm-type mechanical valve, louder speaker, main PCB, chip (also called Microprocessor Control Unit/MCU, which can be sourced from Taiwan), backlight, and LCD.
Cambodia components include: sensor connector, adapter jack label, keys (M, ON/OFF and SET), upper cover, arm solenoid valve, ABS pump fixed film, lower cover, battery cover, arm with socket, PVC tube, 90° four-way gas pipe connector, LCD fixed frame, air plug, arm cuff, and silk screen printed transparent sheets. In Cambodia, the main PCB, MCU, resistors, capacitors, transistors, crystal oscillators, and other electronic components are soldered to form a motherboard using surface mount technology (“SMT”).
Chinese-origin software source code is compiled by the Cambodian engineer to generate the firmware file based on the different functions of the order. The firmware file is downloaded to the MCU. The motherboard will be tested to check if it is fully functional. The pressure sensor will be soldered to the motherboard. The LCD and zebra paper are hot pressed using a hot press machine, followed by the motherboard. The motherboard is debugged. The metal dome and button PCB are soldered.
The remaining assembly processes involve: the horn wire welding, batter reeds and buzzers (or horn assembly) assembly, pneumatic components (cuff plug, pump, solenoid valve, silicone tube) assembly, lower cover pneumatic components assembly, power socket wire (DC outlet PCB, electric outlet, and wire) soldering, back soldering, COB lower cover assembly, upper cover assembly, upper and lower cover assembly, lower cover screw, transparent sheet assembly, final inspection, and battery cover assembly.
The complete device and the cuff are packaged together. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350225).