The country of origin of a Label Maker Hack Pack
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- In accordance with Headquarters Ruling Letter H350263, dated October 3, 2025, for purposes of additional trade remedy measures, the countries of origin of the Label Maker Hack Pack will be Taiwan, Italy, Malaysia, or Vietnam (the country of origin of the microcontroller) and China (the country of origin of the remaining components).
Ruling text
In your letter dated June 16, 2025, on behalf of CrunchLabs LLC, you requested a country of origin ruling for purposes of additional trade remedy measures. A description and sample of the subject good were submitted in connection with your inquiry. FACTS: The good under consideration is identified as the “Label Maker Hack Pack.” It is an unassembled kit for teenagers and adults that includes all necessary components to assemble the good.
All components are imported into the United States packaged together in a retail box.
The individual components are: a USB power bank, a microcontroller, a bread board, an LCD screen, two stepper motors, six pieces of 3mm plywood, a servo motor, painter’s tape, two stepper drivers, a joystick, two markers, two wire connectors, an M3 bearing, 24 5mm bolts, a USB cable, a retractable badge reel, an IM carriage, 14 pieces 5mm hex standoffs, two 5mm steel rods, nine 10mm bolts, a tape chuck, 20 M3 nuts, a lead screw, a pen holder, a grit wheel, two rail mounts, four 15mm hex standoffs, a screwdriver, three elastics, one piece of EVA foam, three 20mm bolts, a punchout card, a piece of breadboard foam, three 8mm bolts, two 20mm bolts, two steel washers, five M4 nuts, three M5 nuts, one 20mm standoff, an extension spring, nine O-rings, one 12mm standoff, one section of tube, one servo arm, a sanding drum, a 3mm spacer, and a servo center screw.
The microcontrollers will originate in Taiwan, Italy, Malaysia, or Vietnam, and the remaining components will originate in China. CrunchLabs’ Label Maker is a robot that can print on a roll of tape so that the user can create labels and robotic art while building their computer programming skills. It is intended to be built primarily for amusement by teenagers and adults who want to learn how to code through the assembly, modification, and operation of the completed item.
The Label Maker comes with pre-programmed characters and the user can reprogram the Label Maker to print other characters and symbols. ISSUE: What is the country of origin of the Label Maker Hack Pack for purposes of additional trade remedy measures? LAW AND ANALYSIS: When determining the country of origin for purposes of applying current trade remedies under Section 301, as well as additional duties, the substantial transformation analysis is applicable.
See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Packaging alone is not a substantial transformation. See Headquarters Ruling Letter (“HQ”) 733729, dated January 2, 1001, which concluded that packaging teas in Singapore did not result in a substantial transformation, as there was no change in the name, character, or use of the imported teas.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350301).