The country of origin of an air temperature sensor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 17, 2025, on behalf of your client, Panasonic Industry Company, Ltd., you requested a country of origin ruling on an Air Temperature Sensor. Descriptive literature was provided for our review. The item under consideration is described as an Intake Air Temperature Sensor (model number ERTSA18D202U), which is attached to the intake pipe inside an automobile’s engine bay. Depending on the temperature of the air taken into the engine, the resistance within the sensor changes.
This change in resistance is transmitted to and detected by the automobile and used for engine control. The Air Temperature Sensor is comprised of numerous components from Japan and China. The Japanese components include the thermistor (sensor that converts temperature to a specific resistance value), lead wires (connect the thermistors to the terminals), terminals (connect the thermistor’s electrical output to the automobile) and resin for the manufacture of the cap and molded parts.
The Chinese components include an O-ring (provides the sensor with an air seal), collar (brass component which affixes the Air Temperature Sensor to the automobile), tube (provides insulation between the lead wires), cap (plastic component that protects the thermistor made from Japanese resin) and additional molded parts (maintain air tightness of the finished sensor and also made with Japanese resin). The Thermistor chip is manufactured in Japan through a multi-step ceramic materials process.
The materials for the thermistor chip are ceramic materials, primarily oxide semiconductor powders (such as manganese, nickel, cobalt, etc.). These powders are mixed and homogenized. The mixed materials are then molded through press molding and sintered at high temperatures to enhance the strength and electrical properties of the ceramics. Conductive metal electrodes (gold) are then formed at both ends of the thermistor. If necessary, the surface of the thermistor element is sliced.
Finally, after attaching lead wires to the thermistor chip with paste, the finished thermistor chip is encapsulated in a glass tube by adding heat. In China, the fully finished thermistor chip with lead wires is connected to terminals via a welding process. Molded plastic parts are created through injection molding which are then combined with the finished thermistor with lead wires and terminals through insert molding to create a finished Air Temperature Sensor.
The finished sensor is then inspected for air leaks and appearance and packaged. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350320).