The country of origin of an oil filter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 18, 2025, you requested a country of origin ruling on an oil filter. Descriptive literature was provided for our review. The item under consideration is described as an oil filter, which is a key component of an engine lubrication system designed to remove contaminants from engine oil, preventing damage to the engine. The filter traps particles like dirt, metal shavings, and carbon deposits, ensuring that clean oil circulates and lubricates the engine’s moving parts.
To install the filter, the user would apply oil on the outer sealing ring of the product and then place the inner thread against the outer thread of the filter seat. The user would then rotate the product until the top surface of the outer sealing ring contacts the base surface of the filter seat. The oil filters are assembled in Thailand using components from Thailand and China.
The Thai components include the spray shell assembly, shell, hot dip galvanized sheet, black powder, oil filter element assembly, central tube, origami (pleating or folding of the filter paper to increase its surface area for more efficient filtration), screw fit plate assembly, threaded cover plate, and some of the packaging including corner protectors, tray cover, pallet, and outer box.
The Chinese components include the upper-end cover, adhesive, galvanized thin sheet, filter paper, lower end cover assembly, diaphragm, silicone rubber, sealing plate, toothless cover plate, sealing ring, and some of the packing including the color box, labels and dust film. The assembly process occurs in Thailand and includes thirty-four individual steps. The process starts with shell punching using a punch press.
Then, a 6-axis tapping machine is used to punch holes into the metal followed by oil being sprayed onto the metal. After the thread inspection, the cover plate is cleaned, the sealing plate is injected with glue, and the screw-fit plate is spot welded. The eighth step includes the center tube manufacturing followed by the shell cleaning, powder coating the metal parts, and screen printing.
Next, the origami is made on a reciprocating origami machine with the resulting strips clipped together using a strip clamping machine. Then, the end cap is glued on, the center tube is placed, and the upper and lower end covers are assembled before heading to the baking tunnel (oven). The screw board is then injected with glue and the check valve is installed before the filter element is assembled and the release spring is added.
The next step involves adding the outside housing and seal before wiping and inspecting the product. Finally, the product is laser marked, sprayed with anti-rust, the sealing rings are assembled, final threading inspection is conducted, and packaged. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350345).