The country of origin of a satellite receiver
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated June 23, 2025, you requested a country of origin ruling on behalf of your client, Shanghai DD&TT Electronic Enterprise Company Limited. The merchandise under consideration is referred to as the “Hopper 3 (Hopper),” which is a satellite receiver with a DVR tuner. The Hopper connects to a smaller receiver through Multimedia over Coax Alliance (MoCA).
Moreover, this receiver consists of two main boards (a motherboard with core components and a Wi-Fi Board), two auxiliary boards (the power board and the button board), and other component parts. In Malaysia, the manufacturing of the motherboard printed circuit board assembly (PCBA), which controls all the critical operations, and the Wi-Fi Board, which provides access to the Internet to view Netflix and other streaming services occurs.
This process consists of surface mount technology (SMT) and Through-Hole Technology (THT) processes. During these processes, numerous electronic components are permanently mounted onto raw printed circuit boards (PCBs) via soldering techniques, which results in fully functioning Malaysian PCBAs that can receive and process satellite signals. In China, the manufacturing of the power board, the button board, and the box build assembly process occurs.
This assembly process involves the assembly of all the PCBAs with the rest of the components, including screwing on the chassis and the rubber feet. Lastly, the completed Hopper is visually inspected for defects. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Based on the facts presented, it is our opinion that the motherboard PCBA and the Wi-Fi PCBA that are manufactured in Malaysia provide the primary functionality for the Hopper. The complex SMT manufacturing production of the motherboard PCBA and the Wi-Fi PCBA consists of placing and soldering numerous individual components onto a bare PCB, thereby, creating functional PCBAs that result in a substantial transformation.
Further, the assembly process performed in China does not substantially transform the motherboards PCBA and the Wi-Fi board into a new and different article of commerce with a name, character, and use distinct from that of the exported good. Accordingly, the Hopper is considered a product of Malaysia for origin purposes at the time of importation into the United States. The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350500).