The country of origin of a hard disk drive
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 1, 2025, you requested a country of origin ruling on behalf of your client, Toshiba America Electronic Components, Inc. The merchandise under consideration is referred to as the Toshiba Canvio HDD, which is a hard disk drive that magnetically stores data, such as documents, pictures, and videos. The Canvio HDD is an external device that can connect to a computer via a Universal Serial Bus (USB).
This external hard disk drive is intended to allow users to easily transport data files on the go and free up space on an internal hard drive on one’s personal computer.
The Canvio HDD is comprised of four main components, which are a Voice Coil Motor (VCM), which is the drive motor of the magnetic head that reads and writes the data; a Media, which is a magnetically coated disc where the data is magnetically stored; a Head Gimbal Assembly (HGA), which reads and writes the data magnetically; and a Spindle Motor (SPM), which allows the Media to rotate.
In the Philippines, the VCM is assembled from components of the Philippines, Thailand or Malaysia using two different manufacturing processes. The first process is through the Actuator Flexible Printed Circuit Assembly (AFA), which occurs by bending the flexible printed circuit (FPC) and positioning the FPC fantail to the actuator circuit assembly, which is combined on the VCM through soldering.
The second process is through the Actuator Pivot Flexible Printed Circuit Assembly, in which a bearing is attached to the VCM using adhesive. The VCM with the bearing attached undergoes UV and oven curing processes. Next, the Head Stack Assembly (HSA) is produced by placing both the HGA (which is assembled in China using components from various countries) and VCM on a tray. The arm of the VCM is used to mount and attach the HGA to the VCM through swaging and a laser soldering process.
The finished assembly is known as the Head Stack Assembly. Then, the Head Disk Assembly (HDA) is produced in the Philippines. An inner stopper and gasket are mounted onto the SPM. Screws and ramps are then placed on a pallet by an operator and the bottom yoke is screwed into the SPM. The Media, which is assembled in either Singapore or Japan and is imported into the Philippines, is mounted on the SPM and secured by utilizing a clamper with a screw. Next, the ramp and HSA are attached to the SPM with a screw.
An operator will manually place a latch (a mechanism that protects the HSA from outside impact) on the SPM while the top yoke is mounted to the SPM. The top cover is fastened to the SPM and the device is tested for air leaks. The unit is tested to ensure the media rotates properly and a visual inspection takes place. After the HDA is complete, a printed circuit board assembly (PCBA) is assembled into the Canvio HDD.
The PCBA is manufactured in the Philippines via SMT using integrated circuits, resistors, capacitors, and diodes. This PCBA plays a role in data read/write control, motor control, overvoltage protection, and support s the stable operation of the Canvio HDD.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N350850).