The country of origin of three oven lights
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- We find that the country of origin for the oven lights will be Thailand in the first scenario.
- Therefore, we find that the country of origin for the oven lights will be China in in the second scenario.
Ruling text
In your letter dated July 8, 2025, you requested a country of origin determination on three oven lights for purposes of current trade remedies. The merchandise under consideration is referred to as Item 1 Wall Oven Lamp (191D7209G007, 191D7209G008), Item 2 Wall Oven Lamp (191D7477G004), and Item 3 Apex Lamp (301D1481G001).
The Bill of Materials (BOM) and the component pictures indicate that the Oven Wall Lamps in Item 1 and Item 2 appear to be highly similar in construction, except for the shape of the light head (housing or case). Each oven lamp has a glass lens, a metal housing containing a ceramic lamp socket, a light bulb, and electrical wires with plug or connector at either end (referred to as “harness” in Item 1 and Item 2). Additionally, Item 2 has a metal clip.
The Apex Lamp (Item 3) has a glass lens, metal case (housing), metal pin, light bulb, and socket with two pins for connection to a power supply. The procedures for the making of components are illustrated as follows: Glass Lens Melting the sand and molding the liquid to shape glass lens. Metal Case, Metal Clip and Metal Pin Cutting the stainless steel sheet and making the metal case by progressive stamping mold.
Ceramic Lamp Socket and Plug Pouring a ceramic powder slurry/sand into the mold and then firing it in a kiln to fuse the particles together. After firing, the ceramic component is then assembled with the metal terminals. Bulb Forming a coil of metal to make the wire, melting the sand to make a glass tube, and mounting the metal filament inside a glass bulb. Finally, attaching the connectors to the bulb for electrical connection. Harness Clamping the terminals to the electrical wires to make the harness.
The terminals and the wires are made in China via operations of metal drawing, plastic extrusion, etc. Connector and Retainer Melting the plastic pellet and making the plastic parts via plastic injection molding operations. The factory in Thailand will assemble the Thai-origin components and components imported from China (of Chinese-origin) to produce the finished lights.
Specifically, you present two different manufacturing process scenarios as follows: Scenario 1 The assembly process for the lamps in Thailand is summarized as follows: Item 1 - The metal case, and bulb are made in Thailand, the glass lens, ceramic, connector, and retainer are imported from China. The harness is made by clamping the terminals to the wires in Thailand from the imported electric wires and terminals.
Item 2 - The metal case, bulb, and metal clip are made in Thailand, the glass lens, ceramic, connector, and retainer are imported from China. The harness is made by clamping the terminals to the wires in Thailand from the imported electric wires and terminals. Item 3 - The metal case, metal pin, and bulb are made in Thailand; the glass lens and ceramic socket are imported from China.
Scenario 2 The assembly process for the three oven lights in Scenario 2 notes that all components are imported from China except for the bulbs, which will be produced in Thailand.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351073).