The country of origin of an LED tub light
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 9, 2025, you requested a country of origin ruling on a tub light. The product under consideration is identified as the Tub Light, Item 308D1661P001 (the “tub light”). The images provided in the Bill of Materials (BOM) indicate that the tub light has a printed circuit board assembly (PCBA), lens, lamp base, PVC sealing, an O-ring, and a harness. The tub light is to be used inside of a dryer or washing machine. The light will go on/off when the door is open/closed.
You present two manufacturing process scenarios, in which the factory in Thailand produces the PCBA (light source) and the lens (only in Scenario 2 as presented below), and then assembles the components of both Chinese-origin and Thai-origin to manufacture the finished tub lights. Scenario 1 The harness, plastic base, PVC sealing, and O-ring are of Chinese origin.
The PCBA is made in Thailand via surface mount technology (SMT) where the printed circuit board (PCB) is populated with an LED from South Korea along with other electronic components. The lens is made in China through plastic injection molding with the US-origin resin PCTG (Poly Cyclohexylenedimethylene Terephthalate Glycol). Scenario 2 The difference between Scenario 1 and Scenario 2 is the production of the lens. In Scenario 2, the lens is made in Thailand where injection molding is done to US-origin resin PCTG.
The rest of the manufacturing processes (including the final assembly) will be the same in Scenarios 1 and 2. You summarize the assembly process in Thailand as follows: Assembling the lens with the O-ring Assembling the PCBA to the lamp base Assembling the harness (connecting the wires with the plug and the light head) Sealing Testing When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
To determine whether a substantial transformation occurs when components are assembled into completed products, all factors such as the components used to create the product and the manufacturing processes these components undergo are considered to determine whether a product with a new name, character, and use has been produced. No one factor is decisive, and assembly/manufacturing operations that are minimal will generally not result in a substantial transformation.
Based on the facts presented, it is the opinion of this office that the PCBA (light source) is fabricated in Thailand. It is the most important or critical component in the subject LED tub light, which also imparts the character of the LED tub light.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351143).