The country of origin marking of LUMIFLEX 3-Stage Balloon Dilatation Catheter
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
This is in response to your letter dated July 10, 2025 requesting a ruling on whether your proposed marking of LUMIFLEX 3-Stage Balloon Dilatation Catheter described below is an acceptable country of origin marking. Representative images of the labels in the pouch and box were submitted with your letter for review. Both labels contain nearly identical information, but their arrangement differs slightly. The country of origin for this product is China.
The country of origin marking on each label is marked with a symbol with “CN” inside rather than stating “Made in China.” You state this symbol with “CN” is recognized by the Food and Drug Administration to identify the country of manufacture of products.
Among other product information in each label, it includes the U.S. company’s name, address, phone, and website as shown below: US Endoscopy 5976 Heisley Road Mentor, OH 44060 (1)800/549-4873 www.steris.com A subsidiary of STERIS Corporation The marking statute, section 304, Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that, unless excepted, every article of foreign origin (or its container) imported into the U.S. shall be marked in a conspicuous place as legibly, indelibly and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the U.S. the English name of the country of origin of the article.
As provided in section 134.41(b), Customs Regulations (19 CFR 134.41(b)), the country of origin marking is considered conspicuous if the ultimate purchaser in the U.S. is able to find the marking easily and read it without strain. With regard to the permanency of a marking, section 134.41(a), Customs Regulations (19 CFR 134.41(a)), provides that as a general rule marking requirements are best met by marking worked into the article at the time of manufacture.
For example, it is suggested that the country of origin on metal articles be die sunk, molded in, or etched. However, section 134.44, Customs Regulations (19 CFR 134.44), generally provides that any marking that is sufficiently permanent so that it will remain on the article until it reaches the ultimate purchaser unless deliberately removed is acceptable.
In Headquarters Ruling Letter ("HRL") 734487 (May 7, 1992), we noted that CBP has been very stringent in approving the use of abbreviations to ensure that an abbreviation unmistakably indicates the country of origin to an ultimate purchaser of a product.
In Headquarters Ruling Letter (“HRL”) 735083, dated August 5, 1993, CBP determined that “NL” is not an acceptable abbreviation for the Netherlands because it does not unmistakably indicate the country of origin to the ultimate purchaser.” Also, see HRL 562240, dated February 4, 2002 (denial of “AU” for Australia). Accordingly, using a symbol indicating the origin, accompanied by the official ISO country code, such as “CN,” is not an acceptable marking to indicate the country of origin of the product.
Section 134.46, CBP Regulations (19 C.F.R.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351179).