The country of origin of an air inflator
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 15, 2025, you requested a country of origin ruling on an air inflator. Descriptive information was provided with the submission. The Lithium Air Inflator, part number DL222-LI, is described as a battery-operated device used to inflate tires, sports equipment, air mattresses and other inflatable items.
The rectangular shaped inflator is portable and features a digital display, SOS technology, LED lights, a type C charging port, a power cord port and a Universal Serial Bus (USB) A output port. The portable inflator will be imported packaged with accessories (four nozzles, a replacement fuse, an air hose, a USB cable and a power cord). With respect to origin, the final assembly of the inflator occurs in Vietnam using components from China and Vietnam.
Prior to the final assembly, the plastic front and rear cases of the inflator are formed in Vietnam and the printed circuit board assembly (PCBA) is produced by soldering Chinese components onto a motherboard. The internal air cylinder of the inflator is also assembled in Vietnam, which begins by die casting a bracket and afterwards riveting a bearing to this bracket.
Then, a gear with a bearing is installed onto the motor from China, which is followed by the installation of a Chinese sourced rod with a leaf spring. Next, a larger gear with a bearing is installed and locked onto the cylinder, and finally, a connecting rod with a bearing is connected to the bracket. The final assembly of the inflator begins by installing a key switch and a display into the front case.
The bottom case with intake and exhaust valves from China are installed to the front case, and a PCBA is positioned and screwed in place. A lamp panel is then soldered to the bottom case, followed by the installation of the air cylinder bracket. Wiring of the air cylinder is connected, and the cylinder is soldered in place. Afterwards, an air sensor is installed, and a lithium-ion battery is snapped in place. The rear case is then connected to the front case and screwed in place.
Upon completion, each inflator undergoes testing and inspections, and finally, is packaged with Chinese sourced accessories. When determining the country of origin for purposes of applying current trade remedies under current trade remedies and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
CBP has held that whether an assembly process is sufficiently complex to rise to the level of a substantial transformation is determined upon consideration of all the operations that occur within that country.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351341).