The country of origin of a stabilizer link assembly. Correction to Ruling Number N350324
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Because the ball stud and link housing, which have been substantially transformed in Thailand, impart the identity of the finished stabilizer link assembly, we find that the country of origin of the Stabilizer Link Assembly, Model Number SB-200, Part Number RLL84202, will be Thailand for marking purposes.
Ruling text
This replaces Ruling Number, N350324, dated July 10, 2025, which contained a clerical error. The company’s name in the address line was incorrectly listed as Zhejiang Ruitai Suspension System Technology Ltd. It has now been corrected to CTS Automotive Co., LTD. A complete corrected ruling follows. In your letter, dated June 17, 2025, you requested a country of origin ruling on a stabilizer link assembly.
The article under consideration is a Stabilizer Link Assembly, Model Number SB-200, Part Number RLL84202, which is a component of an automotive suspension system. The stabilizer link connects the suspension system to the body for flexibility through joints and/or bushings to effectively absorb shocks and vibrations caused by uneven roads. The primary function of the link is to ensure that the tires maintain constant contact with the road, providing traction, stability, and control.
The stabilizer link assembly consists of ball studs, a dust cover, bearing, protect cover, cover plate, nuts, and link housing, which is a rod with two eyelets. The stud blank from steel forging and a steel bar for the link housing are sourced from China and imported into Thailand for further processing. In Thailand, the stud blank undergoes machining, such as rough turning and finish turning of the ball head, shank, and undercut.
Further, the stud is heat treated, degreased, water washed, pickled, water washed again, acidic activator treated, trivalent chromium plated, water washed again, passivated, water washed again, dried, and inspected. The steel bar for the link housing is machined by rough turning and fine turning of the two eyelets and link rod and welding the two housings and link rod together.
After that, the link housing is E-coated by degreasing, water washing, hydrochloric acid, water washing again, rust prevention, and electrophoresis. Finally, the finished ball stud and link housing are combined together in Thailand with the rest of the components, which are all produced in China and imported to Thailand, by inserting and installing into each other to create the finished stabilizer link assembly.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940). Part 134 of the U.S.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351425).