The country of origin of a spark module for a gas range
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Based on the facts presented for configuration 1, the Country of Origin for the spark module for part numbers 311D7051P001, 311D7051P002, 311D7051P003, and 311D7051P004 will be China.
- Based on the facts presented for Configuration 2, the Country of Origin for the spark module for part numbers 311D7051P001, 311D7051P002, 311D7051P003, and 311D7051P004 will be Thailand.
Ruling text
In your letter dated July 17, 2025, you requested a country of origin ruling on a spark module for a gas range. The merchandise under consideration is described as a spark module for a gas range stove and is identified by part numbers 311D7051P001, 311D7051P002, 311D7051P003, and 311D7051P004. It is noted that the different variations are virtually identical and only differ by the specific appliance with which they will be used.
The spark module is attached to a gas range oven and is responsible for generating a high-voltage spark to ignite the gas at the burners. Two configurations were provided for the manufacturing of the spark module. The first configuration has a high voltage (HV) coil, Printed Circuit Board Assembly (PCBA), cover, and epoxy potting all manufactured in China, then shipped to Thailand. In Thailand, the PCBA and HV coil are assembled together. The primary coil lead and terminal are soldered to the PCBA, then are tested.
Once testing is complete, epoxy potting is added to shield the device from the environmental factors and distress. The device is tested again for functionality, and once confirmed, the cover is added, the device is tested, date coded, and packaged in Thailand for export to the United States. The second configuration has an HV coil, cover, and epoxy potting originating in China. The PCBA is manufactured in Thailand. The Chinese components are shipped to Thailand, where the PCBA and HV coil are assembled together.
The primary coil lead and terminal are soldered to the PCBA, then are tested. Once testing is complete, epoxy potting is added to shield the device from the environmental factors and distress. The device is tested again for functionality, and once confirmed, the cover is added, the device is tested, date coded, and packaged in Thailand for export to the United States.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Regarding the subject of the spark module, it is the opinion of this office that for Configuration 1, the Chinese PCBA which sends the electrical signal to increase the power supply to charge the capacitor and discharge to release the pulse signal to create a spark which ignites the gas, imparts the character of the finished device. The assembly process in Thailand is simple in nature and does not substantially transform the PCBA or other Chinese components into a new and different article of commerce.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351455).