The country of origin of a thin film thermal print head
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 18, 2025, on behalf of Kyocera International, Inc. (KII), you requested a country of origin determination for purposes of Section 301 duties, IEEPA tariffs and marking. Pictures and descriptions of the manufacturing processes were included in your submission. The item under consideration is a thin film thermal print head (TPH). The TPH is used within a thermal printer, which uses heat to produce an image or text on specially coated paper, known as thermal paper.
A TPH contains a series of small heating elements that are incorporated on a ceramic substrate, which provides support and protection. Coated on the ceramic substrate is the resistor layer. When current passes through this layer, it generates heat, facilitating the desired changes in the printing material. A Thermal Print Head Driver Integrated Circuit (Driver IC), and a Flexible Printed Circuit (FPC) are mounted onto the ceramic substrate.
When a print command is sent, the Driver IC activates specific heating elements in the print head. These elements heat up to precise temperatures in a pattern that corresponds to the desired output. The FPC connects the printhead’s electrical components to the printer’s main electronics and incorporates an Electrically Erasable Programmable Read-Only Memory (EEPROM). The EEPROM stores data that needs to be retained even when power to the printer is turned off.
The manufacturing process for the TPH begins with a blank ceramic substrate sourced in Japan. The ceramic substrate then goes through a highly automated process (“wafer process”) at a Japanese factory. Resistor and electrode layers, a row of heating elements and soldering pads to prepare for mounting the Driver IC and FPC, are all fabricated on top of the ceramic substrate surface. An overcoat layer is added to protect the row of heating elements from oxidation and abrasion.
The work-in-process parts are inspected and shipped to another Japanese factory, where an epoxy protective layer is screen printed onto the parts. The Driver IC, also sourced in Japan, is mounted onto the substrate and encapsulated in a protective resin. Manual procedures such as FPC and heatsink attachment (sourced in China), printing inspection, and attaching a connector bracket are completed at a plant in China. KII proposes two variations to the above manufacturing process scenarios.
In scenario A, the FPC incorporating the EEPROM is soldered to the thermal print head in China. In Scenario B, the FPC incorporating the EEPROM is soldered to the thermal print head in Japan. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351484).