The country of origin of positive temperature coefficient (PTC) fan heaters
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 20, 2025, on behalf of your client Midea Consumer Electric (Vietnam) Co., Ltd. (“MVN”), you requested a country of origin determination ruling for wire fan heaters for the purposes of applying current trade remedies. The merchandise under consideration is identified as model numbers DR-HSH003/DR-HSH031 PTC fan heaters. The DR-HSH003/DR-HSH031 fan heaters are for household use and packaged individually in single, packaged units.
The DR-HS heaters operate by using a PTC heating element to heat air passing over the PTC heating element. The fan blade in the DR-HS heaters then circulates the heated air to the room or other surrounding area where the DR-HS heaters are located. Except for the minor variations on the color, accessories and shape, all such units will use the same platform and share the same production process.
You present the following manufacturing process scenario, in which the DR-HS heaters are produced in Vietnam through a manufacturing and assembly process comprising two main stages. The bill of materials (BOM) indicates that Vietnam accounts for the majority or a significant portion of the production costs of the DR-HS heaters. Manufacturing process details in Vietnam are outlined as follows: In the first stage, key components are manufactured in Vietnam from various raw materials.
MVN and a third-party supplier will manufacture component parts of the DR-HS heaters in Vietnam from raw materials originating in China. The production of component parts are divided into two steps, as follows: (1) production of plastic parts from plastic raw materials; and (2) production of the PTC heating element.
In step 1, MVN will manufacture the front and back shells, top cover, air duct, circuit board bracket, crank, display window, PTC bracket, bottom cover, oscillating supporter, and bottom housing for both the DR-HS heaters, the decorative ring and indicator bracket for the DR-HSH003 heater, and the control panel, rear cover and rear grille for the DR-HSH031 heater from raw materials via plastic injection molding.
In step 2, the PTC heating element or PTC heater of the DR-HS heaters is manufactured by a third- party supplier of MVN in Vietnam from various raw materials. The production process in Vietnam specifically includes adhering the ceramic heating sheet and the thermal conductive strip together, electric curing the PTC heating element, adding connectors, and conducting multiple tests to confirm the product is functioning correctly.
Next, in the second stage, MVN will place the body components, the PTC heating element, and the remaining components on the main assembly line to produce the finished DR-HS heaters. This final production process consists of manufacturing or assembling the components into sub-assemblies, then installing them into the finished products, inspection, testing, and packaging.
When determining the country of origin for purposes of applying current trade remedies under Section 301, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351504).