The country of origin of an intake manifold and a carbon canister
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 21, 2025, on behalf of your client, Dorman Products, Inc., located in Colmar, Pennsylvania, you requested a country-of-origin ruling determination for an intake manifold and a carbon canister assembled in Thailand with Chinese and Thai parts. You provided videos and documents showing the manufacturing process, and a bill of materials showing the country of origin of each component and part.
The first item is an intake manifold, also known as the inlet manifold, which distributes air to the engine’s cylinders. On many modern cars the inlet manifold is also equipped with the fuel injectors. On older cars without fuel injections, or with throttle body injection, the manifold takes in the fuel-air mixture from the carburetor/throttle body to the cylinder heads. The manifold lets air into the combustion chamber on the intake stroke, which is then mixed with fuel from the injector.
The air reaches the manifold through the air cleaner assembly, which contains the car's air filter. This air filter is designed to stop dust and other foreign bodies from entering the intake and damaging the engine. You state that the intake manifold, which is the subject of this request, is made of plastic, polyamide 6 with 35% glass fiber reinforcement, commonly referred to as PA6 GF35. The following intake manifold production process which you provided video substantiation of takes place in Thailand: 1.
Injection molding process 2. Hot-insert copper nut process 3. Vibration friction welding 4. Air leakage test 5. Chip removing The second item has been identified as an activated carbon canister. The activated carbon canister is used to capture hydrocarbon vapor emissions from the fuel tank as part of a motor vehicle’s evaporative emission control system (EVAP).
When the engine is running these stored hydrocarbons can be purged by the vehicle’s opening of a valve to the intake system and reversing the flow through the carbon canister allowing the engine to consume the hydrocarbon vapors by combustion. You state that the carbon canister is made of plastic (nylon) and polyamide 6 with 35% glass fiber reinforcement, commonly referred to as PA6 GF35, with activated carbon powder material.
The following production processes, which you provided video substantiation of, takes place in Thailand: 1. Injection molding process 2. Vibration friction welding 3. Ultrasonic welding 4. Load activated carbon 5. Vibration friction welding 6. Pressure resistance test 7. Air leakage test 8. Final inspection 9. Laser inscription 10. Packing When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351506).