The country of origin of an impeller and a diffuser
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 21, 2025, you requested a country of origin ruling for the purpose of marking, Section 301 Trade Remedies and other duties. Descriptions of the production processes were provided in the submission. The diffuser and impeller are components of an Electric Submersible Pump (ESP) system used to lift crude oil from a wellbore. The ESP system, which is used in the oil and gas industry, is configured as a multiple stage pump that incorporates multiple impellers and stationary diffusers.
Together, the impeller and diffuser increase fluid pressure that pumps oil through the well. The circular-shaped diffuser and impeller feature a ring of enclosed vane patterns and a center bore that is circular in shape. With respect to origin, the manufacturing of the diffuser and impeller begins in China where they are cast into a casting tree that consists of groups of iron circles attached to a central gating system. The groups of circles do not feature vanes, or a center bore.
Once imported into Malaysia, the castings of the diffuser and impeller are subject to shell treatment, an initial sandblasting phase, cutting and separation processes, a manual saw cutting process, a second sandblasting phase, two machining phases, and polishing and turning operations. During these processes, approximately 66 percent of material from the diffuser's shell and casting, and 85 percent of material from the impeller's shell and casting, are removed.
Once complete, a tungsten carbide component is installed and glued into the center of the diffuser and a washer is installed into the diffuser. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Additionally, Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351538).