The tariff classification of hardware packs from China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The general rate of duty will be 8.5% ad valorem.
- The general rate of duty will be 6.2% ad valorem.
- The applicable subheading for Item 5340005, 4 Pin and Cable - Quick Release Steel Hd/Ft board will be 7318.29.0000, HTSUS, which provides for Screws, bolts, nuts, coach screws, screw hooks, rivets, cotters, cotter pins, washers (including spring washers) and similar articles, of iron or steel: Non-threaded articles: Other.
Ruling text
In your letter dated July 21, 2025, you requested a tariff classification ruling. The articles under consideration are described as hardware packs: Item 7000049BEI — Side Rail Assembly for Pan 3000 and 3250 Long Term Care Bed; and Item 7000050BEI — Side Rail Assembly for Pan 3500 Long Term Care Bed. The hardware packs consist of the following components: Item 3040078, 2 steel wire corner mattress retainers. These connect to each corner of the bed frame to hold the mattress in place.
Item 5340022BEI, 4 steel headboard and footboard brackets for Quick Release - horizontal. These are straight metal columns that will be inserted into the vertical bracket. Together they will function to attach the headboard or footboard to the bed. Item 5340023BEI, 4 steel headboard and footboard brackets for Quick Release - Vertical. These are L-shaped metal columns into which the horizontal bracket will be placed. Together they will function to attach the headboard or footboard to the bed.
Item 4010015, 8 Cap Insert - Flat Head - 1/4-20x 16 mm (Honey Bronze). These are bronze cap inserts that function to cover the hex screws that attach the headboard or footboard to their respective brackets. Item 4000197 8 Hex screws - Cap, PPH, Steel, Zinc Plated - 1/4-20 x 1 1/2". These are steel, pan head, socket cap screws that measure .25 inches in diameter. Item 4000207, 1 Screw - Sheet Metal, PFH, Steel, Zinc Plated - #10-12 x 3/4".
These sheet metal screws measure approximately .190 inches (4.83 mm) in diameter and 3/4 inches long. They have a Phillips head drive with a gimlet point. Item 5340005, 4 Pin and Cable - Quick Release Steel Hd/Ft board - The quick release pins are made of steel, are non-threaded, and have a spring-loaded locking ball mechanism on one end and a steel wire loop attached at the top. A steel wire cable with a bracket for a screw is attached to the loop.
Item 4000036, 4 Insert - Plastic "IV" Socket - These plastic sockets are for IV poles and are put on the top end of each headboard and footboard bracket. Item 4040025, 1 Clamp - Adjustable Nylon Cable - These are used to hold a cable in place. A 4 mm hex wrench. These wrenches are used to tighten the hex screws. These packs consist of only some of the hardware used to complete the specified beds.
The packs are typically imported with the entire bed, but this request concerns the classification of the hardware packs when imported separately.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351539).