The country of origin of a tap, die and spiral screw extractor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 21, 2025, you requested a country of origin determination for purposes of Section 301 and IEEPA duties. Pictures of the merchandise in different stages of manufacture were included with your submission, along with a narrative of the manufacturing processes. The three steel tools under consideration are a tap, die and spiral screw extractor. Taps are used to cut internal threads within a hole in a workpiece, while dies are used to cut external threads on screws, bolts, rods, or studs.
Tap wrenches and die stocks hold the tap or die while in use. A spiral screw extractor is a specialized tool designed to remove broken, stripped or stuck screws and bolts. Typically, a power drill is used to hold and turn the extractor while in use. The manufacturing process for the tap begins in Thailand, where steel rods are cut to the overall size and shape of the tap. The outer threads are rolled onto the tap, and the shank and drive of the tool are ground.
The tap is then sent to China, where the chamfered end is formed and, in some instances, flutes or grooves are ground into the threads. The manufacturing process for the die begins in Thailand, where steel rods are cut and chamfered into the outer shape and size of the die. The die is then put through a multi-station milling machine where the center of the die is cut out and the internal threads are milled.
After this process, the die is sent to China for deburring, further chamfering, heat-treatment, sandblasting, and laser etching. The manufacturing process for the spiral screw extractor begins in Thailand, where steel rods are cut into the length of the tool. The shank and dive are ground and threads are rolled onto the extractor before it is sent to China. In China, the extractor is heat-treated, sandblasted and a logo is laser etched onto it.
When determining the country of origin for purposes of applying current trade remedies under Section 301 and other duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993). Regarding the tap and die, it is our view that steel rod is substantially transformed in Thailand into recognizable tool blanks in each of your manufacturing scenarios.
Based on the submitted information and pictures of the tools, it is our opinion that no article emerges from the finishing operations in China with a new name, character, or use different from that prior to processing. Although not ready for direct use, the tool blanks that arrive in China have a pre-determined use and are in a dedicated physical form of a die and tap. Therefore, it is our determination that the country of origin of the tap and die is Thailand.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351557).