The country of origin of a bottle jack
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the bottle jack, model number THB12-4, will be Thailand.
Ruling text
In your letter dated July 22, 2025, you requested a country of origin ruling on behalf of your client, Torin (Thailand) Co., Ltd. The subject merchandise is a hydraulic bottle jack, model number THB12-4, and is described as a vertical hydraulic jack that utilizes a high-pressure cylinder and pump mechanism to lift objects. It is used during automotive repair as well as in industrial, farming, and construction applications.
In New York Ruling Letter N344692, dated January 10, 2025, we considered a different production process for the subject bottle jack. The production scenario discussed in that ruling has been discontinued. In the current manufacturing scenario, raw material, steel pipes, and steel bars will be manufactured into a base assembly, ram assembly, pump plunger assembly, handle assembly, and other components in Thailand.
Additional components will be sourced from China, including a handle socket assembly, a relief valve, a safety valve, and miscellaneous items including screws, snap rings, O-rings, washers, plugs, ball bearings, springs, and pins. The factory in Thailand is divided into multiple sections. The first section is dedicated to creating the ram assembly and its subcomponents, which include a piston rod, a piston head, a screw sleeve, and an adjustable top screw.
The piston rod is created from steel pipe that is cut to length, drilled to create process holes, and then machined on both ends using a step turning process. The piston head is created using a sand-casting process then machined to its final tolerances. Next, the subcomponents are assembled. A Chinese-sourced threaded screw sleeve is pressed into one end of the piston rod, an adjustable top screw is threaded into the sleeve, and the piston head is pressed into the opposite end of the piston rod.
The next section is dedicated to manufacturing the remaining components for the bottle jack, including a base, a cylinder body, an outer sleeve, a pump body, and a pump plunger. This starts with using a hot forging process to create a rough form for the base. The base is finished by milling end faces for the safety and return valves, machining grooves for oil flow, drilling holes for the oil plug and process holes, and tapping the holes for the valves.
Separately, the cylinder body and the outer sleeve are created using operational steps that include cutting steel pipes to length, machining grooves, creating chamfered edges, drilling holes, and more. The outer sleeve has a rounded top which is created by partially closing one end of a pipe using a stamping process. A pump body and pump plunger assembly are created from round steel bars, which are cut to size, machined to create chamfered ends and grooves, then drilled.
For the pump plunger, a seal kit is also pre-installed. Final assembly requires welding the cylinder to the base, welding the outer sleeve to the base, welding the pump body to the base, installing the safety and release valves, installing the pump plunger assembly, installing the ram assembly, adding oil, and attaching the handle assembly. Lastly, the bottle jack is painted and packaged for export.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351580).