The country of origin of wheel hub units
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Therefore, the country of origin of the double flanged wheel hub units with tapered roller bearings, Part Numbers EBH3240 - MOOG: 515096, EBH3241 - MOOG: 515097, and EBH3239 - MOOG: 515058 will be Thailand.
Ruling text
In your letter dated July 23, 2025, you requested a country of origin ruling on wheel hub units, which you filed on behalf of EBI Transmission System (Thailand) Co., Ltd. The articles under consideration are double flanged wheel hub units with tapered roller bearings (wheel hubs), Part Numbers EBH3240 - MOOG: 515096, EBH3241 - MOOG: 515097, and EBH3239 - MOOG: 515058, which are used in passenger vehicles, and light and heavy trucks.
The wheel hubs are installed in the wheels of the motor vehicle to support and bear the weight of the wheels as well as the load from the road surface. They provide stable axle support through inner and outer roller bearings, providing anti-friction functions which allow the wheels to rotate smoothly. They also transmit power generated by the engine or electric motor to the wheels, enabling the vehicle to move.
In addition, the wheel hubs are combined with the vehicle's suspension system to provide suspension support, alleviate vibrations, and any impacts caused by uneven road surfaces, to provide better ride comfort and stability. The wheel hubs consist of inner and outer rings, inner and outer flanges, tapered rollers, retainers, seals, anti-lock braking system (ABS) sensors, and bolts.
You state that the inner and outer flanges, grease, labels, and packaging materials will be sourced in Thailand while other unfinished component parts will be sourced from China. The component parts sourced from China are roughly cut and imported into Thailand without precise measurements and grading necessary for final use in the wheel hubs.
Although the inner and outer rings, tapered rollers, retainers, seals, ABS sensors, and bolts will be sourced from China, the critical finishing work for each component part and the sophisticated subassembly and assembly processes will take place at EBI Transmission System (Thailand) Co., LTD in Thailand. The manufacturing process in Thailand begins with the selection of appropriate raw materials. High-carbon chromium steel, such as GCr15, is used due to its high hardness, wear resistance, and fatigue resistance.
Blanking is then performed where the round steel from China is cut into billets of specified dimensions by sawing or precision cutting. Afterwards the cut billets undergo forging, CNC rough turning, CNC finishing sequence, drilling, chamfering, tapping, flange splining, raceway grinding ditch and super-precision channel, cleaning, and corrosion prevention.
To comply with U.S. motor vehicle and other safety standards, as well as the weight demands of high-performance modern automobiles, the flanges and other component parts of the wheel hub undergo mechanical processing and heat treatment. The outer ring and inner ring grinding is conducted using CNC grinding machines to refine the outer diameter, inner diameter, and end surfaces to an IT5 accuracy level. Raceway grinding follows, achieving Ra 0.2m surface roughness for smooth rolling body contact.
The assembly begins with cage mounting, where tapered rollers are fitted with steel or polymer cages like PA66. Sealing ring assembly follows, with double-lip sealing rings installed to prevent contaminants from entering.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351627).