The country of origin of a cutting chisel
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 23, 2025, on behalf of Betek GmbH & Co. KG, you requested a country of origin determination for purposes of Section 301 duties, IEEPA tariffs and marking. Pictures and descriptions of the manufacturing process were included in your submission. The merchandise under consideration is identified as a chisel. The imported tool incorporates two parts: a cold forged steel body and a carbide tip. The chisel is used in underground coal mines on large continuous miner machines.
It is the part of the machine that penetrates and cuts pieces of coal out of rock. Multiple chisels are used on one miner machine. In operation, each chisel is mounted into individual holders that are welded onto the drum of the continuous miner machine. Neither the steel body nor the carbide tip are reusable, and that once worn out they will be used as scrap.
You have stated that final manufacturing of the chisel will occur in Germany using parts and components from one or more countries in the European Union (EU) and a Chinese-origin carbide tip. The manufacturing process for the chisel begins in Italy, where the rough steel body is cold forged. It is then sent to Germany, where the steel body is machined to exact technical specification. Specifically, the base of the body is machined to fit precisely into the holder on the continuous miner machine.
In addition, a hole is precision-drilled in the top of the steel body to accommodate the carbide tip. The remaining steps of the production of the finished chisel are also performed in Germany. This includes sandblasting the steel body and the Chinese-origin carbide tip in preparation for brazing. The steel body is also washed to remove oil residue and rust protection that was applied for transport.
The carbide tip is then inserted into the steel body, and both are brazed together using a specialized, proprietary brazing powder consisting of a mixture of copper, manganese, and tin, all of which originate from Germany or another EU member country. During the brazing process the steel body and carbide tip are heated to melt the brazing powder and to allow it to fill the joint. Th fully joined steel body and carbide tip are then splat cooled in oil to form a permanent bond.
After completion of the brazing process, the fully formed chisel then undergoes tempering and annealing in an annealing furnace to reduce the likelihood of any stress fractures occurring during use. Finally, the chisel is again sandblasted to remove any scaling that may have built up from the brazing process.
The finished chisel is then reviewed for quality control, packaged, and shipped to the customer so as to be attached to the underground continuous mining machine When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351631).