The tariff classification of multilayer wood flooring from Indonesia
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the multilayer wood flooring panels with a 4.16mm-thick face ply of oak will be 4418.75.7000, HTSUS, which provides for Builders' joinery and carpentry of wood, including cellular wood panels and assembled flooring panels; shingles and shakes: Assembled flooring panels: Other, multilayer: Other.
- The rate of duty will be 5 percent ad valorem.
- The rate of duty will be 8 percent ad valorem.
Ruling text
In your letter, dated July 25, 2025, you requested a binding classification ruling on multilayer wood flooring. Product information and a sample were submitted for our review. The product under consideration is a multilayer wood flooring panel. The flooring panel is constructed of three wood plies. The panel measures approximately 188mm wide by 15mm thick. You state that the face ply measures 3.7-3.8mm in thickness.
However, as classification is based on the actual product at time of importation, we are classifying the product based upon the actual measurements of the sample provided. The face ply, measuring 4.16mm in thickness, consists of a continuous sheet of white oak (Quercus alba., a non-coniferous wood) wood veneer. The center ply, measuring approximately 9.5mm in thickness, consists of blocks of rubberwood (Hevea spp., a tropical, non-coniferous wood) wood.
The back ply, measuring approximately 1.5mm in thickness, consists of Jabon (Anthocephalus cadamba, also known as Kadam) or Sengon (Paraserianthes falcataria, also known as Batai).veneer. Both Jabon and Sengon are tropical, non-coniferous woods. The grain of the center ply runs at a 90-degree angle to that of the face and back plies. The surface of the face ply is coated with a clear urethane that does not obscure the face ply. The panel is tongued and grooved on its edges and ends.
In understanding the language of the Harmonized Tariff Schedule of the United States (HTSUS), the Explanatory Notes to the Harmonized System (ENs) may be utilized. The ENs, although not dispositive nor legally binding, provide a commentary on the scope of each heading of the HTSUS, and are the official interpretation of the Harmonized System at the international level.
See T.D. 89-80, 54 Fed. Reg. 35127, 35128 (August 23, 1989). “Plywood” is defined in the ENs for heading 4412, HTSUS: a panel “consisting of three or more sheets of wood glued and pressed one on the other and generally disposed so that the grains of successive layers are at an angle.” This definition describes the instant panels.
The ENs also describe “blockboard” as panels “in which the core is thick and composed of blocks, laths or battens of wood glued together and surfaced with the outer plies.” This also describes the instant panels. Both plywood and blockboard are specifically provided for in heading 4412 of the HTSUS. However, in the case of multilayer assembled wood flooring with a face ply of 4mm or more in thickness, Additional US Note 4(b) to Chapter 44, HTSUS, governs classification.
This note states that “(h)eading 4418 includes multi-layer assembled flooring panels having a face ply 4 mm or more in thickness.” The instant product is a multilayer wood flooring panel that is an assembly of layers. The face ply measures 4.16mm in thickness. Therefore, the panels are classifiable in heading 4418.
The applicable subheading for the multilayer wood flooring panels with a 4.16mm-thick face ply of oak will be 4418.75.7000, HTSUS, which provides for Builders' joinery and carpentry of wood, including cellular wood panels and assembled flooring panels; shingles and shakes: Assembled flooring panels: Other, multilayer: Other.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351710).