The tariff classification and country of origin of pressure sensors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated July 31, 2025, you requested a tariff classification and country of origin ruling. Descriptive literature was provided for our review. The items under consideration are described as ultra-low-pressure sensors (APP-9U Series) designed for applications requiring precise measurement of very low pressures, such as heating, ventilation, and air conditioning (HVAC) units. The sensors have a measuring range from 0-5 mbar up to 200 mbar.
Depending on the specific sensor within the series, they can measure gauge, vacuum, and differential pressure using an unamplified output with an accuracy of 0.5% full scale (FS). All of the sensors are similar in construction and are only differentiated by variations in shape, the types of pressure they can handle, and full-scale pressure range.
These Micro-Electro-Mechanical System (MEMS) sensors consist of a piezoresistive silicon pressure sensor chip and an integrated circuit for signal processing and the conversion of pressure into electrical signals using the change in resistance under strain caused by pressure. This change in resistance is then measured as a change in voltage, effectively turning physical pressure input into an electrical output.
The die (which is a piece of silicon containing a complete integrated circuit that has been cut from a larger silicon wafer) is designed and manufactured in the United Kingdom and contains all of the sensor’s electronic functionality. The process involves photolithography, ion-implantation, sputtering, wet and dry etching, and finally probe inspection. The die is subsequently shipped to China, where the wire bonding is attached, and the plastic components are molded before final encapsulation.
Finally, an electrical continuity and function test is performed prior to being packaged and shipped.
The applicable subheading for the ultra-low-pressure sensors (APP-9U Series) will be 9026.20.4000, Harmonized Tariff Schedule of the United States (HTSUS), which provides for “Instruments and apparatus for measuring or checking the flow, level, pressure or other variables of liquids or gases (for example, flow meters, level gauges, manometers, heat meters), excluding instruments and apparatus of heading 9014, 9015, 9028 or 9032; parts and accessories thereof: For measuring or checking pressure: Electrical.” The general rate of duty will be free.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351865).