The tariff classification of hot tap and line stop equipment from Spain
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The applicable subheading for the line stop/completion machines and their associated equipment, i.e., actuator, adaptor, plug holders, pivoting line stop head or plugging head, slim valve, and completion machine, when imported together, will be 8479.89.9599, HTSUS.
Ruling text
In your letter dated July 31, 2025, you requested a tariff classification ruling on hot tap machines and line stop/completion machines and associated equipment. The imported mechanical equipment is used to perform hot taps and line stops in “live” (pressurized) oil and gas pipelines without service interruption.
Hot taps involve drilling or cutting a hole in an existing pipeline using a hot tap drilling machine to add new connections and branches to the pipeline without shutting down the system or interrupting the flow of the product. Line stops and completion operations, performed by line stop and completion machines, are used when it is necessary to isolate a section of the pipeline by temporarily blocking the flow, typically for pipeline repairs, replacements or modifications.
The imported equipment will include two groups of mechanical apparatus: hot tap equipment and line stop/completion equipment. The hot tap equipment features a tubular hot tap machine (drilling machine) with an integrated boring bar and protective housing. The drilling machine will be imported with: (1) a pneumatic motor for powering the drill; (2) threaded and flange tapping adaptors; (3) a slim (aka sandwich) valve for temporary gas or fluid flow isolation; and (4) hole saw cutters and pilot drill bits.
In operation, a fitting with a flanged outlet (not imported here) is attached to the existing pipe. The valve is attached to the fitting, and the drilling machine is inserted into the valve. The tapping adaptor is bolted to the valve and connects the drilling machine to the valve, acting as pressure-tight housing for the hole saw. The hole saw cuts out the “coupon” or curved section of pipeline wall.
After the cutter has cut through the pipe, it is retracted into the adapter (along with the coupon), and the valve is closed, and the drilling machine is removed from the line. The line stop equipment includes: (1) a line stop actuator; (2) an adaptor, (3) plug holders; (4) a pivoting line stop head or plugging head with a sealing element; (5) a slim valve; and (6) a completion machine. The actuator is a mechanical sealing unit, containing a control bar with the pivoting head attached.
The actuator is fixed to a housing, which in turn is fixed to the slim valve that opens to permit the pivoting head to be inserted into the pipe. Hydraulic pressure supplied to the actuator causes the control bar to advance the pivoting head to the bottom wall of the pipe. A completion machine is used after the line stop intervention is complete to finalize a line stop repair by inserting a permanent sealing component referred to as a completion plug. The completion plug itself is not included in the importation.
You suggest that the two groups of imported equipment, i.e., the hot tap equipment and the line stop/completion equipment, together qualify as a single functional unit within the meaning of Section XVI, Note 4, Harmonized Tariff Schedule of the United States (HTSUS) and therefore are classifiable together under single tariff heading. We disagree, as the function of these two groups of equipment are not the same.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351866).