The country of origin of digital multimeters and a receptacle tester
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the digital multimeters (model numbers GDT-311, GDT-3190, GDT-3200, and 42095RAW) and the GFCI receptacle tester (model number HGT6520) will be Vietnam, which is where the PCBA creation, programming and assembly occurs.
Ruling text
In your letter dated August 1, 2025, on behalf of your client, Shanghai SDAR Electronic Instruments, Co., Ltd., you requested a country of origin ruling on digital multimeters and a receptacle tester. Descriptive literature was provided for our review. The first items under consideration are described as digital multimeters (model numbers GDT-311, GDT-3190, GDT-3200, and 42095RAW), which are electronic instruments that measure AC/DC voltage, current, and resistance.
The devices operate by using a combination of analog and digital circuitry to convert the electrical signal into a digital reading displayed on the LCD screen. The user selects the appropriate function (voltage, resistance, or continuity) and range using the rotary dial, then connects the test leads to the circuit or component being measured. The main difference between the GDT-311 and GDT-3190 lies in the measurement range.
The GDT-3200 can also measure diodes and temperature and is equipped with a buzzer function. Compared with other models, the 42095RAW digital clamp multimeter is additionally equipped with a clamp jaw for measuring high currents. The second item under consideration is described as a ground fault circuit interrupter (GFCI) receptacle tester (model number HGT6520), which is an electronic instrument used to check whether the wiring of a GFCI outlet is correctly installed.
It works by plugging the device into an outlet and using a single LED indicator to display various wiring conditions, including correct wiring, open ground, open neutral, hot/ground reverse, and hot/neutral reverse. Additionally, it can be used to test the functionality of the GFCI by pressing a dedicated test button, which should trip the GFCI if it is working correctly.
Its main components include a printed circuit board assembly (PCBA), light emitting diode (LED) indicators, a metal plug, button, and plastic housings. The manufacturing and assembly process for both the digital multimeters and GFCI receptacle tester occurs in Vietnam and is a substantially similar process. It starts with the PCBA creation using surface mount technology (SMT) in Vietnam. The electronic components (resistors, capacitors, etc.) from various countries are mounted onto the printed circuit board (PCB).
This involves a solder paste application, placement of components, reflow soldering, cleaning, and testing to ensure circuit functionality. The next process includes the chip-on-board (COB) processing where the PCB is cleaned, glue is dispensed, and the semiconductor die is unpackaged and attached to the PCB. Additional steps include wire-bonding, functionality testing and epoxy encapsulation.
This portion of the process is only applicable to the manufacturing of digital multimeters and does not apply to the HGT6520 GFCI Receptacle Tester. The next process for both the multimeters and the receptacle tester also occurs in Vietnam and includes the through-hole assembly and testing where the remaining larger components (from various countries including China) are manually inserted and soldered onto the PCB.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351911).