The country of origin of a refrigerant recovery unit
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Thus, based on the totality of the circumstances, the country of origin of the refrigerant recovery unit will be China.
Ruling text
In your letter dated August 1, 2025, you requested a country of origin ruling on behalf of your client, Value (Thailand) Co., Ltd. Descriptive information was provided in the submission. The product at issue is a refrigerant recovery unit. The unit, which is a composite machine, is designed to push liquid refrigerant into an external recovery tank and is comprised of an outer casing that primarily encloses a motor, a compressor, a condenser, a fan, and a filter.
In operation, a motorized compressor suctions refrigerant vapor from refrigeration equipment or an air conditioning unit, the refrigerant is filtered of solid impurities, and the condenser and fan expel heat, reducing the temperature of the refrigerant. With respect to origin, the final assembly occurs in Thailand using components sourced from China and a motor produced in Thailand. The assembly of the motor begins by winding copper wire from Thailand onto a stator core from Thailand.
Tubing and sleeves are then placed over the copper wires, and additional wiring is soldered to the copper windings. Next, an electronic board is welded to the motor stator assembly, which is followed by the installation of a magnetic ring, a terminal block assembly and a back cover. Afterwards, magnets are bonded to the rotor shaft from Thailand, and a cover is installed over the shaft. Subsequently, a bearing is installed onto the shaft of the motor, and a front cover is pressed in place.
Finally, the stator and rotor subassemblies are secured to each other using screws, resulting in a finished DC motor. During the final assembly, a fan air guide cover, a fan, and a coupling from China are assembled onto both ends of a motor and secured in place with screws. Mounting feet are then installed on both sides of the motor to form the motor subassembly. The motor subassembly and a compressor subassembly from China are screwed together.
The baseplate and left group plates are installed onto the compressor feet, and a condenser from China is installed onto the compressor assembly. Wiring connections are then made, and a sensor is installed. Next, two gears and a control valve from China are installed, which is followed by the placement of the handle fixing frame to the motor and control valve. A hook is then joined to the right plate and afterwards installed onto the unit. A rubber-coated handle is installed onto the top plate.
Subsequently, membrane keys are affixed onto the transparent panel, which along with a digital display board assembly from China, is secured to the front cover using screws. Additional wiring connections are completed. Then the front and back covers from China are aligned with the baseplate groups and screwed in place. As the aforementioned steps occur, a large knob is installed.
The assembly process continues by soldering any remaining wires, and the installation of a retaining ring, and a filter screen from China. Once the unit passes testing and inspection, it is packaged with a drying filter from China. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351922).