The country of origin of a laser measurement tool
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated August 4, 2025, you requested a country of origin ruling on a laser measurement tool. Descriptive literature was provided for our review. The item under consideration is described as a laser measurement tool, which is a battery-operated electronic device used to provide various measurement readings. It works by emitting a laser pulse and calculating the distance based on the time it takes for the beam to return to the device after reflecting off a target.
This “time of flight” measurement is highly accurate, especially for shorter and medium-range distances. The measurement range is 1.15 inches to 135 feet with an accuracy of 1/8 inch.
There are six laser measure modes including distance, continuous, area, volume, Pythagorean method-two points (the tool measures two sides of a right triangle and then the device calculates the length of the third side automatically), and Pythagorean method-three points (establish a baseline, measure the hypotenuse, measure the adjacent leg and then the laser measurement tool will use these two measurements and the Pythagorean theorem to calculate the remaining leg, which represents the height or length of the object the user could not measure directly).
The measuring device is primarily used in the home and construction industries, measures 0.79 inches long by 1.38 inches wide by 2.76 inches high, and weighs 90 grams. The laser measurement tool mainly consists of a Vietnamese engine Printed Circuit Board Assembly (PCBA) and charging PCBA, and a Taiwanese laser diode.
Additional Chinese components include a lens, module housing, display, screen panel, silicone buttons, lithium battery, light guide component, flexible printed circuit (FPC) button, shell, warning label, screws, charging port plug, black wire, movement foam, and screen foam. Specifically, each laser measurement tool is comprised of a total of twenty-eight main individual components, eighty-five components that make up the engine PCBA, and twenty-five components that comprise the charging PCBA.
The engine PCBA includes numerous Chinese components being placed using surface mount technology (SMT). These components include capacitors, suppressors, a semiconductor, photonics, an FPC connector, inductance, resistors, shielding, the printed circuit board (PCB), main chip, Electrically Erasable Programmable Read-Only Memory (EEPROM), Application-Specific Integrated Circuit (ASIC) chipset, and additional small components.
The SMT process that creates the PCBA undergoes the procedures of pre-production preparation, stencil preparation and solder paste printing (choosing the proper laser-cut stencil with enlarged apertures for pads to ensure sufficient solder volume), automated component placement, and reflow soldering. Subsequently, the engine PCBA’s firmware is programmed to enable distance measurement, calculation, Human-Machine Interface (HMI) functions (e.g., display, keypad interaction) and power management.
Finally, the charging PCBA is tested to make sure it has the ability to charge the lithium battery. The two PCBAs are then sent to China for further assembly and processing.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N351962).