The country of origin of a compressor
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated August 5, 2025, on behalf of your client, Universal Air Conditioner, LLC., you requested a country of origin ruling on a compressor to apply current trade remedies and for marking purposes. The product at issue is a compressor, model number SD7H15. The compressor is designed to be installed in a motor vehicle and connected to the belt system of the engine.
Once powered, the pistons of the compressor’s swashplate subassembly transfer rotational power within the planetary disc subassembly, which moves back and forth. The resulting motion pressurizes and displaces gas used in the air conditioning system. With respect to origin, the final assembly of the compressor occurs in Malaysia using components from China and Malaysia. Prior to the final assembly, the cylinder block, the rear head and certain subassemblies are produced in Malaysia.
To produce the cylinder block, raw metal from China is melted in a furnace and subsequently pressed into a mold. Afterwards, the mold is deburred, heat treated, brushed and shot blasted. Next, the front and rear planes undergo rough turning, and the piston holes and end face are machined, which is followed by reaming, milling, drilling and tapping processes. Machining continues and subsequently the oil plug holes and grooves are subjected to turning. The finished cylinder block is then cleaned.
The rear head is formed using melting, casting, deburring, heat treating and shaping processes. The high- and low-pressure holes and end faces are then finished, the intake and exhaust holes are bored, and the planes are milled, drilled and tapped. The production of the swashplate subassembly begins by sourcing a swashplate casting from China. In Malaysia, the surfaces of the plate and shaft are turned, and holes are incorporated into the plate.
The compressor shaft is then mechanically pressed into the swashplate subassembly and adjustments are completed using a drilling machine. A pin is then pressed into the subassembly, and the plate of the subassembly is machined on its flat surfaces. To produce the planetary disc subassembly, Chinese sourced piston rings are mechanically pressed on a piston. Next, the piston and connecting rod from China are riveted together using a hydraulic press.
Gears are then pressed into the planetary disc guide rings and afterwards combined with the connecting rod assembly to form the planetary disc subassembly. Subsequently, the piston subassembly is joined to the ball socket of the planetary disc and pressed in placed. During the final assembly, the planetary disc assembly is mechanically installed in the cylinder block, and a front cover is pressed against a main bearing, followed by the installation of a swashplate subassembly.
Then, the necessary connection to the planetary disc is completed. Next, a bearing is installed, the front cover assembly is bolted to the cylinder body, and a shaft seal and retaining ring are pressed into the cylinder block. A semicircular key is also installed, and a valve plate, along with the respective gaskets and reeds, are bolted in place.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352067).