The country of origin of an ultrasonic sensor module
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the ultrasonic sensor module (Part No. 0060858035) will be China.
Ruling text
In your letter dated August 11, 2025, you requested a country of origin ruling on an ultrasonic sensor module. Descriptive literature was provided for our review. The item under consideration is described as an ultrasonic sensor module (Part No. 0060858035), which is a functional component in the automatic water filling system of smart refrigerators. It consists of a front plastic bracket and an ultrasonic sensor module, assembled as a single integrated unit.
The primary function of the component is to detect water levels inside a container using ultrasonic signal transmission and reception. In operation, the module’s processor sends a short pulse to its trigger pin, which allows the transmitter to send out a burst of ultrasonic sound waves. As soon as the sound waves are sent, the module’s echo pin rises, starting a timer. The ultrasonic waves travel away from the sensor at the speed of sound and bounce off any object in their path.
The reflected waves then travel back to the sensor. When the echo is detected by the receiver, the echo pin goes low, stopping the timer. The total time the echo pin was high corresponds to the time it took for the sound to travel to the object and back. This calculates to a distance and ultimately a level in the container being filled. The product measures 22cm in length by 9.3cm in width by 0.85 cm in height. The manufacturing process occurs in Malaysia with components from Malaysia and China.
The Malaysian components include the bracket, which provides the structural housing for precise probe positioning and integration with the refrigerator system, and some packaging including the label and anti-static packaging bags. The Chinese components include the plastic housing, rubber ring, piezo element, wire harness, printed circuit board (PCB), solder wire, label, and potting glue.
In Malaysia, the Chinese-origin ultrasonic sensor components (including the piezo element, PCB, wire harness, plastic housing, and rubber parts) undergo a multi-stage assembly process that produces the finished functional sensor modules. The process starts with the assembly of the core components (i.e., PCB alignment with the piezo element, soldering, and trimming excess pins).
The process then moves into the electrical validation (capacitance measurement and polarity verification) stage followed by waterproof sealing (piezo element insertion into the rubber sleeve and shell, and sealant curing). Finally, the individual module undergoes functional testing, which includes echo testing to confirm detection capability. Two completed sensor modules are then integrated with a plastic bracket to form the dual-sensor water level detection assembly.
This final configuration undergoes additional system-level functional testing to ensure their proper pairing and synchronization. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352230).