The country of origin of a SprintRay NanoCure 3D Printer Post-Curing Device
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin of the NanoCure will be Thailand for purposes of applying trade remedies under Section 301.
Ruling text
In your letter dated August 11, 2025, on behalf of your client, SprintRay Co. Ltd., you requested a country of origin ruling on a SprintRay NanoCure 3D Printer Post-Curing Device. Additional information was provided by email dated September 1, 2025. The SprintRay NanoCure is a post-curing device measuring 7.9 x 8 x 13.5 in. (W x D x H) that uses two wavelength (365 nm and 385 nm) LED lights to cure 3D printed dental appliances.
It is designed for dental offices, enabling practitioners to have a curing device chairside. The device utilizes a combination of ultraviolet (UV) light and heat to transition 3D printed parts from their initial “green state,” where polymerization is incomplete, to a fully cured final state. The main components of the device are identified as a motherboard, a UV panel, a heater, and a fan. The NanoCure is designed and developed in the United States. The components are fully assembled in Thailand.
The country of origin of the SprintRay NanoCure was previously ruled on in NY Ruling N345397, dated February 12, 2025. You state the assembly process described in N345397 is the same as the current ruling request, with two key distinctions: 1. The manufacturing operations previously performed in Mexico, as described in Ruling N345397, will now take place in Thailand. 2.
The Mainboard (Android Motherboard), LED Driver Board (referred as driver board), Screen Adapter Board, Power Button Board, Power Interface Board will be manufactured in Thailand. The Core board will be manufactured in China. The Core Board is a generic off-the-shelf component which houses the CPU for the NanoCure. The curing logic is stored on the Core Board. The Core Board is sent to Thailand to be assembled to the Motherboard (also named the Android Motherboard).
The Motherboard is a custom designed PCBA, adapted to the Core Board, which enables the communication of the curing logic between the Core Board and individual components on NanoCure. Motherboard Production in Thailand: The Motherboard is equipped with an Android-based operating system and serves as the central processing unit, housing the curing logic for the device.
It regulates the sequence and duration of UV light and heat application through communication with the driver board using the UART (Universal Asynchronous Receiver/Transmitter) communication protocol. The mother board functions as the “brains” of the NanoCure containing the logic and controls required to deliver the advanced synchronization of UV light, heat, and thermal management.
In Thailand, approximately 97 components predominately from China are assembled to the motherboard using Surface Mount Technology (SMT). Then the motherboard undergoes stringent quality control processes including advanced X-ray and Automated Optical Inspection (AOI) technologies. Software and firmware, developed in the United States, are installed on the motherboard in Thailand, enabling the NanoCure to achieve full functionality.
UV Panel Production in Thailand: The UV Panel functions as the primary curing source, initiating the photopolymerization process to advance the curing of the 3D printed parts.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352242).