The country of origin of outdoor units
Revocation proposed. CBP proposed to revoke this ruling in Customs Bulletin Vol. 60, No. 27 (Sep 9, 2026), with comments due Oct 9, 2026. No final action or withdrawal has appeared in a later issue read here. Until one does the ruling has not been revoked or modified, but the proposal states that CBP considers it to be in error.
Ruling text
In your letter dated August 14, 2025, you requested a country of origin ruling on outdoor units. Descriptive information was provided with your submission. The products at issue are outdoor units, model numbers HD PRO, HD ULTRA, HD EDGE, and HI UNI. The outdoor units consist of a chassis that encloses a compressor, a condenser, a motor, a fan, a printed circuit board (PCB) and valves. Each unit is designed to be paired with a separately imported indoor unit to produce a system that heats and cools spaces.
With respect to origin, the final assembly of each unit occurs in Thailand using components from China and subassemblies produced in Thailand. For instance, the PCB subassembly is manufactured in Thailand using components sourced from Japan, the Netherlands, the United States and Germany. The processes required to produce this subassembly consist of insertion, surface mounting, coating, and soldering.
Once the aforementioned processes are complete, a chip is mounted to the circuit and control boards using machines that dispense glue and complete surface mounting processes. To form the fan subassembly, a fan hub and blades are produced using an injection molding process in Thailand using globally sourced plastic pellets. Afterwards, bushings and bearings from China are joined to the fan hub and blades using processes such as ultrasonic welding and heat treatments.
To form the condenser subassembly, aluminum foil is molded and stamped into the shape of the fin. Next, copper tubes from China are cut and bent into U shapes. The U-shaped tubes are then inserted into the holes of the fins and subjected to a pipe expansion process and then a drying process. Once dried, the U-shaped tubes, along with connectors, joints, and plugs, are brazed onto a condenser from China. Finally, the condenser is inflated with nitrogen and subsequently tested.
For the compressor subassembly, feet are pressed onto a compressor from China. The metal panels, plates and brackets used with each unit are also formed in Thailand. The production of these items begins by cutting coils of steel into appropriate sizes. The metal components then undergo stripping or slicing processes to bring the cut pieces to the required shapes. Afterwards, the individual components are subjected to various stamping, bending, spot welding, spraying, and painting processes.
During the final assembly of each unit, a condenser and a compressor subassembly are bolted onto the bottom plate. Shut-off valves are then assembled into subassemblies and installed, which is followed by the welding of a four-way valve subassembly to the air exhaust, the input pipes, and the outlet nozzle of the condenser. Afterwards, a motor bracket is affixed in position, and the unit is filled with refrigerant. Then, a separator plate and a reactor are installed, followed by the installation of various sensors.
Next, an electric box with a PCB subassembly is installed. Subsequently, a single fan subassembly is affixed to the motor, and the electrical connections are completed. Finally, outer panels, along with a top plate, are installed. Once complete, each unit is tested, inspected, labeled and packaged.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352477).