The country of origin of rooftop air conditioning units
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated August 21, 2025, you requested a country of origin ruling on behalf of your client, Midea Intelligent Manufacturing (Thailand) Co., Ltd. The articles at issue are MIT rooftop air conditioning units, model numbers TR-WKG437S250A/WN10XB and TR-WKG297S225A/WN10XB. The units consist of a chassis comprised of plates and a frame that encloses compressors and various subassemblies, such as the condenser and evaporator subassemblies.
The air conditioning units are designed to cool living spaces or small offices and have an output that exceeds 17.58 kilowatts per hour. With respect to origin, the final assembly of each unit occurs in Thailand using components and subassemblies from Thailand and other countries. Before the final assembly, the components that make up the chassis are manufactured in Thailand using stamping and pressing processes.
The galvanized steel sheets are then uncoiled and bent to shape to produce the respective framework components. For instance, to form the frame, four crossbeams are bolted to each other, and the six protective plates are screwed to the crossbeams. A wooden frame is then placed on top of the six plates. An electro-powder coating is applied, waterproof plate is screwed in place and insulation is taped in the appropriate locations.
Afterwards, the left and right welding a subassemblies and two covers are screwed into position. Rubber washers are then attached. To form the external side panels, the column welding, the external end panel and the partition plate, processes such as welding, coating, gluing and applying aluminum tape occur. To form the air duct panels, boards are welded, followed by a gluing process.
In addition to the housing and framework, various subassemblies such as condenser and evaporator subassemblies, the expansion valve subassembly, the exhaust and suction pipe subassemblies, and the supply and return air subassemblies are produced in Thailand. The production of the condenser and evaporator subassemblies begins by punching holes in pre-cut plain pipes. The pipes are then grooved, cut with slits and cleaned.
Afterwards, spacers, caps, brackets and adapters are installed, and the fins are formed using stamping and cutting processes. Next, the copper pipe is swaged, the aluminum pipe is flared, and the pipes are then welded and bent, which is followed by the installation of the aluminum fins. In the following step, the slide plates are installed, and the manifolds are assembled to the pipe core assembly.
Subsequently, binding, spraying and welding processes occur, and the inlet and outlet pipes are welded to the core assembly, which is subsequently charged and tested. To complete the two condenser subassemblies, copper pipe is cut to length, bent, flared and welded to the input and output sections of heat exchange units. Two sensor attachment sleeves are then welded to the pipes. Afterwards, the condenser subassemblies are injected with gas.
To form the evaporator subassembly, the input pipe is formed by cutting and bending copper pipe. The shaped pipes are inserted into the distributor and welded in the joint area. Afterwards, copper pipe is cut, bent and flared.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352741).