The country of origin of micro controller integrated circuits
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The country of origin for marking purposes will be Singapore at time of importation into the United States.
Ruling text
In your letter dated August 25, 2025, you requested a country of origin ruling on micro controller integrated circuit chips on behalf of your client, Nuvoton Technology Corp. The item concerned is a microcontroller integrated circuit chip (Product No: KM1M7AF52NXW, Product Name: Micro Controller, Model Name: MOS Microcomputer IC). This item is designed for optimal power electronics control, featuring high processing performance and low power consumption.
In use, the micro controller is mounted on the micro-inverter module on the back of a solar panel. It precisely controls the operation of the DC/DC converter and DC/AC inverter using Pulse Width Modulation signals. It also continuously monitors the voltage and current of the battery and the grid via an Analog-to-Digital Converter. Furthermore, it serves a communication role, exchanging data with the PLC Controller & Circuit through Universal Asynchronous Receiver/Transceiver communication.
The manufacture of the micro controller takes place in several countries and the manufacturing steps are as follows: Wafer Production - The wafer may be manufactured within various countries - (i.e. Japan, USA, Singapore, Taiwan, etc.) The manufacturing process includes: Ingot Manufacturing - High-purity polycrystalline silicon is filled into a quartz crucible. The polycrystalline silicon is melted at a high temperature and grown into a single-crystal silicon ingot.
Wafer Slicing-After smoothing the surface of the ingot, it is cut into blocks. The ingot blocks are then sliced into individual wafers. Wafer Surface Polishing - After polishing the edge of the cut wafers, the wafer surface is smoothed and planarized. They are then packaged and exported to Singapore for the subsequent process. Front-end manufacturing - The actual micro controller die are created on the wafer during the front-end manufacturing process that takes place in Singapore.
The front-end manufacturing process includes: Film Deposition - The wafer is placed in a high-temperature oxidation furnace (1000-1200) to form a silicon oxide film on its surface. Resist Coating - A thin layer of photoresist (a photosensitive film) is applied to the wafer. Exposure - Align the photomask with the wafer, and then shine light from above to print the pattern onto the wafer.
Development - Using a developer solution removes the photoresist in the exposed areas, which reveals the silicon oxide layer underneath. Etching - Using a corrosive solution (etchant) or an active gas in a plasma state, the exposed silicon oxide layer is scraped away to reveal the silicon surface of the wafer. Resist Stripping - Stripping away the unwanted photoresist.
Impurity Doping - Using ion implantation, impurities (boron, phosphorus, etc.) are injected into the silicon surface from which the silicon oxide layer has been removed. Metallization - After repeating above steps, holes are created to connect the devices and circuits. Then, a thin metal film (aluminum or copper) is formed on the wafer surface using a sputtering technique to electrically connect the devices and circuits.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352821).