The country of origin of a cool mist humidifier
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated August 25, 2025, you requested a country of origin determination on behalf of your client, Crane USA Inc., on a humidifier for purposes of current trade remedies. The merchandise at issue is identified as Cool Mist Humidifier (humidifier). It consists of a removable water tank, cover top assembly, minimum/maximum adjustment, green LED operational, and red LED low water level indicator.
You present a manufacturing scenario as described below: The ultrasonic nebulizer will be sourced and manufactured in South Korea. The ultrasonic nebulizer is a piezoelectric ceramic element, and its function is to convert electrical energy into ultrasonic mechanical vibration and create aerosolized water droplets without heat. Its performance depends on crystal microstructure, dimensional accuracy, and precise resonance tuning.
The production process of ceramic devices in ultrasonic nebulizers involves powder preparation, forming, sintering, electrode deposition, poling, assembly, and testing. You emphasize that the precision of thickness and resonance tuning is critical because the efficiency of nebulization depends strongly on how well the ceramic resonates at the driving frequency.
The production of the ultrasonic nebulizer comprises of the following steps: Ceramic powder formulation and pressing/sintering under tightly controlled thermal profiles to achieve the target density, grain size, and piezoelectric constants. Electrode deposition and patterning with tight tolerances to ensure uniform excitation. Dicing, lapping, and polishing to micron-level flatness for efficient coupling and stable resonance.
Electrical polarization and frequency tuning to the target ultrasonic band to control droplet size distribution and output. Protective surface treatments and sealants to mitigate moisture/mineral attack in continuous water exposure. Advanced QC using impedance analysis and laser vibrometry to verify resonance frequency, Q-factor, and amplitude. The controller is also produced in South Korea. The Controller provides high-frequency drive signals and system control.
It must generate a stable ultrasonic oscillation, manage power, and maintain safety and reliability in a humid environment. The key manufacturing/engineering operations in the making of the control include: High-frequency driver design and PCB layout practices that minimize parasitic inductance/capacitance and Electromagnetic Interference (EMI) FR-4 stack-up selection and copper geometry optimized for current density and thermal management.
Surface Mount Technology (SMT) assembly with precision placement, reflow profiling, and selective soldering for mixed technology. Functional and safety testing (In-Circuit Testing (ICT)/functional test, overload/short protection verification) at operating voltage/current. Conformal coating to protect against condensation and ionic contamination; coating selection and application method (spray/dip/selective) must balance dielectric strength and reworkability.
The balance of the components, such as the cover, handle, water tank, tank cover, cock, valve screws, fan, nuts, spring, adaptor, and metal screw assemblies, are made in China.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352841).