The country of origin of long nose pliers, diagonal pliers, linesman pliers, and groove joint pliers
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated August 27, 2025, on behalf of your client, The Davidson Works Co., Ltd., you requested a country of origin determination ruling for four different types of pliers for purposes of Section 301 and IEEPA duties. The first type are long nose pliers that will be imported in 6" and 8" sizes. The second are diagonal cutting pliers imported in 6", 7.5" and 8" sizes. The third are linesman pliers imported in 8", 9", 9.5" and 9.75" sizes.
The fourth are groove joint pliers imported in 8", 10", 12", 16" or 20" sizes. Long nose pliers feature long, narrow jaws that taper to a point, making them ideal for precision tasks such as electrical work. Diagonal cutting pliers have angled jaws for clean, accurate wire cutting. Lineman pliers are built for gripping, twisting, cutting, and crimping wires, commonly used in electrical and construction applications. Groove joint pliers are adjustable and designed to grip and turn objects of different sizes.
All of the pliers will be manufactured from either chrome vanadium steel or standard steel. You have stated that the manufacturing process for each style of pliers is substantially the same, apart from component costs. In each case, the manufacturing process begins in Vietnam, where raw steel is forged into rough castings of the two halves of the pliers (i.e., the pieces incorporating the handles and jaws). These pieces are then bent, shaped and trimmed of excess material.
Further in Vietnam, they are heat treated, polished and shaped to ensure proper alignment. Pivot holes are punched into each piece, and they are aligned using a locating pin and temporarily fastened. The jaws of the pliers are then milled to precision. The pliers are then sent to China, where they are heat treated to increase hardness and permanently assembled with a rolling rivet. They are surface finished, cleaned and a corrosion resistant oil is applied.
Finally, the pliers are laser marked, PVC plastic grips are applied to the handles, the jaws are dipped in rust-preventative oil, and they are packaged for retail sale. When determining the country of origin for purposes of applying current trade remedies under Section 301 and other duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Regarding the country of origin of the four styles of pliers, it is our view that raw steel is substantially transformed in Vietnam into the two halves of the pliers (i.e., the pieces incorporating the handles and jaws), where they are bent and shaped into their final form, and the jaws of the pliers are milled to precision.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N352986).