The country of origin of rubber transmission belts
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated August 28, 2025, you requested a country of origin ruling on rubber transmission belts Item 1 is a timing belt. It is a synchronous belt composed of a layer of rubber incorporating glass fiber cord with a layer of fabric on the teeth. The rubber is either hydrogenated nitrile butadiene rubber (HNBR) or chloroprene rubber (CR) of Thai origin; the glass fiber cord is of either German or Japanese origin; and the high elastic nylon fabric is of English or Japanese origin.
The imported belt is ready for use and requires no further processing after importation. All manufacturing steps take place in Thailand. Compound rubber undergoes a calendaring process to adjust the thickness of the sheet and incorporate the wedge (cogged) surface. Once the appropriate thickness is obtained, the rubber sheet is fed onto a splicing machine. The product then undergoes the building process where the cord is incorporated into the rubber, and the fabric is applied to the teeth.
The slab is placed into a vulcanizer to be cured at high temperature and pressure. After the slab is cooled it is placed on the grinding machine to create a smooth surface. The slab undergoes a cutting process to create pieces according to specifications. The belts are measured, inspected, and packed for shipment. Item 2 is a cogged belt. It is a synchronous belt composed of a layer of rubber incorporating polyester cord with a layer of fabric on the backside.
The ethylene propylene diene monomer (EPDM) rubber is of Thai origin, the polyester cord is of German or Japanese origin, and the backside fabric is of English origin. The imported belt is ready for use and requires no further processing after importation. All manufacturing steps take place in Thailand. Compound rubber undergoes a calendaring process to adjust the thickness of the sheet and incorporate the wedge (cogged) surface.
Once the appropriate thickness is obtained, the rubber sheet is fed onto a splicing machine. The product then undergoes the building process where the cord is incorporated into the rubber, and the fabric is applied to the backside. The slab is placed into a vulcanizer to be cured at high temperature and pressure. After the slab is cooled it is placed on the grinding machine to create a smooth surface. The slab undergoes a cutting process to create pieces according to specifications.
The belts are measured, inspected, and packed for shipment. Item 3 is a serpentine belt (grinding belt). It is a belt with a trapezoidal cross-section (V ribbed belt) incorporating between 3 and 20 ribs based on specifications. The belt is composed of a layer of smooth (backside) EPDM rubber, a layer of polyester or nylon cord and a layer of ribbed EPDM rubber. The EPDM rubber is of Thai origin; the polyester or nylon cord is of German or Japanese origin.
The imported belt is ready for use and requires no further processing after importation. All manufacturing steps take place in Thailand. Compound rubber undergoes a calendaring process to adjust the thickness of the sheet. Once the appropriate thickness is obtained, the rubber sheet is fed onto a splicing machine.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353013).