The tariff classification, country or origin, and marking of an unfinished Flexible Intermediate Bulk Container (FIBC) shell from China
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- CLASSIFICATION: The applicable subheading for the Unfinished FIBC shells with only side walls and no bottom panel will be 6307.90.9891, HTSUSA, which provides for “Other made up articles, including dress patterns: Other: Other: Other: Other: Other.” The rate of duty will be 7 percent ad valorem.
- The applicable subheading for the Unfinished FIBC Shells with a bottom panel, with or without the discharge spout will be 6305.32.0010, HTSUSA, which provides for “Sacks and bags, of a kind used for the packing of goods: Of man-made textile materials: Flexible intermediate bulk containers: Weighing one kg or more.” The rate of duty will be 8.4 percent ad valorem.
- The applicable subheading for the Finished FIBC Shells will be 6305.32.0010, HTSUSA, which provides for “Sacks and bags, of a kind used for the packing of goods: Of man-made textile materials: Flexible intermediate bulk containers: Weighing one kg or more.” The rate of duty will be 8.4 percent ad valorem.
Ruling text
In your letter dated September 3, 2025, you requested a ruling on the tariff classification, country of origin, and marking of an unfinished FIBC shell. You provided a corner section of an unfinished FIBC shell to this office, and it will be retained for training purposes. SKU #SS 47X39X41 TLBS, described as an “Unfinished FIBC Shell” is intended to be assembled into a completed StackSack™ IBC after importation.
The unfinished FIBC shell consists of two layers of 100 percent woven polypropylene (PP) strips coated on both sides with 80 percent PP and 20 percent polyethylene (PE) for the side walls and one layer for the bottom of the bag. The coating is not visible to the naked eye. The polypropylene strips forming the fabric from which the FIBC is made measure less than 5 millimeters in width.
As it meets the width requirement of Section XI, Legal Note 1(g) of the Harmonized Tariff Schedule of the United States (HTSUS), the material used in the construction of the unfinished FIBC shell is considered a textile fabric for tariff purposes. The open top, rectangular shaped bag measures 47 inches in length by 39 inches in width by 41 inches in height.
The bag features 8 pre-sewn pockets, two rows of 100 percent PP webbing sewn along the circumference of the bag, and a PP webbing lifting loop located at each of the four corners for lifting the bag. The unfinished FIBC Shell weighs more than one kilogram. You state that corrugated plastic or plywood panels will be inserted into the pre-sewn pockets after importation and the top edge of the side walls will be sewn closed creating a StackSack™ IBC.
You also state that the unfinished FIBC shells will be imported in two different varieties. The first variety contains only side walls and no bottom panels. The second variety contains a bottom panel which may be imported with or without a discharge spout at the bottom of the bag. The type of unfinished shell imported depends on the customer purchasing StackSack™ IBC.
The manufacturing operations for the Unfinished FIBC Shells are as follows: China: · The PP strips are woven into fabric and dyed. · The PP fabric is coated on both sides with PP and PE and formed into side walls. · The thread, PP webbing, yellow rope and blue rope lock are produced. · The fabric is ultrasonically cut. · The pre-sewn pockets are produced. · A bottom panel with or without a discharge spout may be sewn onto the bag, depending on the variety of the bag. · The PP webbing and PP webbing loops are sewn onto the bag. · The unfinished FIBC bag is shipped to the United States for further processing.
The United States (further processing after importation): · Corrugated plastic and plywood panels are produced, cut to size, and inserted into the 8 pre-sewn pockets. · The top edge of the FIBC bag is sewn shut. · The completed item is called a StackSack™ IBC. · Produce the lid panel for the FIBC bag. ISSUE: What is the classification, country of origin, and marking for the Unfinished FIBC Shells?
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353225).