The country of origin of Spinal Needles
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated September 4, 2025, you requested a country of origin ruling on Spinal Needles. The provided sample has been reviewed and disposed of. Spinal Needles are medical devices used for the administration of anesthesia. Each needle consists of a stainless-steel shaft with a bevel (you refer to it as a cannula), a stainless-steel stylet, a plastic cannula hub, a plastic stylet hub (plunger), and a plastic needle protector (cover).
The provided Reli® Quincke Point Spinal Needles Datasheet indicates that the needles range from 18-gauge to 27-gauge and 1.5” to 8” in length. You describe the manufacturing process as follows: 1. Production in Japan: Stainless-steel hollow tubes are cut to length and sharpened to form the cannula. The stainless-steel stylet is manufactured from solid stainless-steel wire using a similar process. Bevel of stylet is ground to match bevel of cannula.
All of the above processes, including the sourcing of raw materials for the stainless-steel cannula and stylet, are performed in Japan. 2. Assembly in China: The Japanese-origin cannula and stylet are exported to China. Plastic hubs and plungers, made from raw material sourced from Japan, are affixed to the cannula and stylet using adhesive glue of Japanese origin. A needle protector, molded in China using Japanese raw materials, is assembled onto the cannula.
The completed needles are packaged in units of 100 and then boxed in cardboard cartons. The cardboard boxes are sourced in China. The primary function of the completed Spinal Needles is to inject local anesthetics into patients to provide regional anesthesia. They will only be used by trained healthcare professionals. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
Based on the above-described manufacturing process, the assembly operations occurring in China do not result in a substantial transformation of the Japanese-origin cannulas and stylets into new articles of commerce. The Japanese cannulas and stylets retain their own identity having the same name, character, and use after the assembly process in China. Accordingly, we have determined that the country of origin of the Spinal Needles is Japan.
The holding set forth above applies only to the specific factual situation and merchandise description as identified in the ruling request. This position is clearly set forth in Title 19, Code of Federal Regulations (CFR), Section 177.9(b)(1).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353260).