The country of origin of ABS Sensors
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- Accordingly, the country of origin for the Active ABS Sensor, SKU # LG105051, and the Passive ABS Sensor, SKU # LG201281, will be China.
Ruling text
In your letter dated September 11, 2025, you requested a country of origin ruling on behalf of your client, Eray Company, Ltd. There are two items at issue with this request. The first is identified by SKU number LG105051 and described as an active ABS sensor. The subject sensor is comprised of a Hall Effect Integrated Circuit (IC) sensor assembly attached to the end of a length of insulated cable. The subject device is attached within the wheel of a vehicle in order to detect the speed of the wheel.
The Hall Effect sensor creates a magnetic field around the target wheel and senses when the wheel rotates and passes through the field. An electrical signal is then sent through the attached cable to the vehicle’s Electronic Control Unit (ECU) for interpretation of the wheel’s speed and rotation. In your request, you state that the assembly process is completed in Thailand. This process begins with the importation of Chinese-origin insulated cable as well as the Hall Effect IC.
In Thailand, the cable is cut to length, and the ends are exposed for the addition of the sensor head and the connectors. The IC is then bent and installed within the molded sensor housing before this is attached to the end of the cable. A connector is then assembled onto the other end of the cable before the finished device is tested and packaged for shipment to the United States. The second item is identified by SKU number LG201281 and described as a passive ABS sensor.
This sensor is comprised of a two-wire magnet sensor, which consists of a magnet within a coil of copper wire within a plastic enclosure. This sensor assembly is attached to an insulated cable conductor. You state that the device is attached within the wheel of a vehicle in order to detect the speed of the wheel. This function is achieved by the device creating a magnetic field around the target wheel.
As the wheel rotates, the magnetic field is broken and an electrical impulse is sent to the ECU for interpretation. In your request, you state that the assembly process is also completed in Thailand. Insulated cable, which originates in China, is cut to the desired length and the ends are prepared for the addition of the sensor and connector. Copper wire, which also originates from China, is wrapped around a Chinese magnet and installed within the molded sensor head.
The sensor assembly is then attached to the end of the cable and a connector is assembled onto the other end. The finished device is then tested and packaged for shipment to the United States. When determining the country of origin for purposes of applying current trade remedies under Section 301 and additional duties, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter H301619, dated November 6, 2018.
The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing. See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353655).