Country of origin and marking determination of a face mask; 19 CFR 102.21(c)(5)
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Key passages, quoted from the ruling
- The face mask is classified under subheading 6307.90.9870, Harmonized Tariff Schedule of the United States (HTSUS).
- The country of origin of the face mask is Vietnam pursuant to 19 CFR 102.21(c)(5).
Ruling text
In your letter dated September 12, 2025, you requested a ruling on the country of origin and marking of a face mask on behalf of your client, Winner Medical Co., Ltd. In lieu of a sample, photographs of the face mask were provided with your request. The item, described as a “Medical Face Mask,” is a unisex nonwoven disposable face mask that is intended to be used as a protective face covering.
The pleated face mask is composed of three layers of nonwoven textile fabric: a light blue 100 percent spun bonded polypropylene top layer; a white 100 percent melt-blown polypropylene middle layer; and a white 100 percent spun bonded polypropylene bottom layer. The face mask measures 6 ½ inch in length by 3 ½ inch in width and features an iron core nylon strip on the top edge which lies on the bridge of the nose to help the mask conform to the contours of the face.
The face mask is fastened behind the ears with nylon ear loops. The manufacturing operations for the face mask are as follows: China: -100 percent spun bonded polypropylene nonwoven fabric (top layer) is formed. -100 percent melt-blown polypropylene nonwoven fabric (middle layer) is formed. - Iron core nylon nose bridge strip and nylon ear loops are produced. - Materials are shipped to Vietnam.
Vietnam: - 100 percent spun bonded polypropylene nonwoven fabric (bottom layer) is formed. - Cutting and sewing of face mask. - Face masks are packaged in a heat sealed bag containing 50 pieces each then placed in a box. - The boxes are placed in cartons, with each carton containing ten boxes. - The cartons are shipped to the United States. ISSUES: What is the country of origin determination and country of origin marking of the subject merchandise?
COUNTRY OF ORIGIN - LAW AND ANALYSIS: Section 334 of the Uruguay Round Agreements Act (codified at 19 U.S.C. 3592), enacted on December 8, 1994, provided rules of origin for textiles and apparel entered, or withdrawn from warehouse for consumption, on and after July 1, 1996. Section 102.21, Customs Regulations (19 C.F.R. 102.21), published September 5, 1995 in the Federal Register, implements Section 334 (60 FR 46188).
Section 334 of the URAA was amended by section 405 of the Trade and Development Act of 2000, enacted on May 18, 2000, and accordingly, section 102.21 was amended (68 Fed. Reg. 8711). Thus, the country of origin of a textile or apparel product shall be determined by the sequential application of the general rules set forth in paragraphs (c)(1) through (5) of Section 102.21.
Paragraph (c)(1) states, “The country of origin of a textile or apparel product is the single country, territory, or insular possession in which the good was wholly obtained or produced.” As the subject merchandise is not wholly obtained or produced in a single country, territory or insular possession, paragraph (c)(1) of Section 102.21 is inapplicable.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N353658).