The country of origin of an automotive display
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated September 24, 2025, you requested a country of origin ruling on an Ultra Light Emitting Diode Automotive Display (uLED Display Set), model # CN30UYX02.0, on behalf of your client, AUO Corporation. The uLED Display Set will be used by U.S. importers as an automotive display to project the car logo, charging status, and driving modes. The product utilizes microscopic LEDs to form individual pixels that provide precise display control and enhanced brightness and color.
The manufacturing process of the uLED Display Set will take place in both Taiwan and China, with the most critical manufacturing steps taking place in Taiwan prior to importation into the U.S. The core parts of the uLED Display Set will be manufactured under two main processing steps that take place in Taiwan.
The Taiwanese manufacturing process under Step 1A includes: Unpacking, Cleaning and Thin Film Deposition: The glass substrates are removed from packaging by a robotic arm and cleaned to prepare the substrates for the thin-film transistors (TFTs) array process. First, the glass substrate undergoes a physical vapor deposition (PVD) process, through a sputter machine, where films of metal materials are deposited onto the surface of the glass.
Next, the glass substrate undergoes a chemical vapor deposition (CVD) process, through a CVD or sputter machine, where films of chemical materials are deposited onto the surface of the glass. Photolithography: Photo-resist coating is applied to the glass substrate. A coater system is used to apply photosensitive material uniformly across the entire glass substrate. Using an exposure machine, the glass substrate is irradiated with ultraviolet light, transferring onto it a high-precision TFT pattern via a mask.
A developing system uses developer fluid to dissolve the photoresist previously applied, leaving only the resistant TFT pattern. Dry/Wet Etching and Stripping: Portions not covered by the photoresist are removed to form the transistor circuits. A dry etching machine decomposes the insulation film with a corrosive gas. A wet etching machine dissolves the metal film with a liquid chemical. A resist stripping machine is used to remove the photoresist.
Array Testing and Packing: The glass substrate is tested by an array tester system, for both electrical and non-electrical defects. The glass substrate is placed by a robotic arm onto glass trays. The Taiwanese manufacturing process under Step 1B includes: Unpacking, Cleaning and Thin Film Deposition: The glass substrates are removed from packaging by a robotic arm and cleaned to prepare the substrates for the TFT array process.
The main difference between the array process in Step 1B is that it does not use LTPS technology during the array process. Moreover, the array process in Step 1B begins with CVD. Films of chemical materials are deposited onto the surface of the glass through a CVD machine. The glass substrate then undergoes a PVD, through a PVD machine, where films of Metal materials are deposited onto the surface of the glass. Photolithography: Photo-resist coating is applied to the glass substrate.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N354175).