Classification and country of origin determination for ballistic-grade unidirectional fabrics; 19 CFR 102.21(c)(1), 19 CFR 102.21(c)(2); tariff shift; 19 C.F.R. 102.20; substantial transformation
No Headquarters ruling in this index revokes or modifies this ruling. That is not confirmation that it is still in effect: this index does not hold every Headquarters ruling. Confirm its current status with CBP before relying on it (ruling on CBP CROSS). Text last read from CBP on Nov 21, 2026.
Key passages, quoted from the ruling
- This is in reply to your letter dated September 25, 2025, requesting a classification and country of origin determination for two style ballistic-grade unidirectional fabrics on behalf of KPMI, Inc, which will be imported into the United States.
- The applicable subheading for the UHMWPE UD FLEX_KH3100A, will be 5603.13.0095, HTSUS, which provides for “Nonwovens, whether or not impregnated, coated, covered or laminated, weighing more than 70 g/m² but not more than 150 g/m² impregnated: Other.” The general rate of duty will be Free.
- The applicable subheading for the UHMWPE UD FLEX_KS0101 will be 3921.90.1500, HTSUS, which provides for “Other plates, sheets, film, foil and strip, of plastics: Other: Combined with textile materials and weighing not more than 1.492 kg/m2: Other: Flexible: Other.” The general rate of duty will be 4.2 percent ad valorem.
Ruling text
This is in reply to your letter dated September 25, 2025, requesting a classification and country of origin determination for two style ballistic-grade unidirectional fabrics on behalf of KPMI, Inc, which will be imported into the United States. Samples of the fabrics were provided and sent for laboratory analysis. The samples will be retained for reference purposes.
FACTS: Item #1, identified as UHMWPE UD FLEX_KH3100A, is a four-layer, unidirectional fabric composed of u ltra-high molecular weight polyethylene (“UHMWPE”) fibers combined with polyethylene film (“PE”) layers. The material features a PE film layer, followed internally by a layer of UHMWPE fibers, another layer of PE film, and a final outer layer of UHMWPE fiber.
This specific arrangement ensures that only one of the product's two exposed outer surfaces is covered by a protective PE film sheet on one outer surface. T he product is primarily used in the manufacture of ballistic goods. Bulletproof vest manufacturers use the product as a raw material, stacking and pressing it to produce ballistic plates that meet stringent ballistic performance requirements. Item #2, identified as UHMWPE UD FLEX_KS0101, is a unidirectional sheet consisting of four layers.
The two inner layers are comprised of ultra-high molecular weight polyethylene (UHMWPE) nonwoven fabric which are sandwiched between two layers of compact PE. The product is primarily used in the manufacture of ballistic goods. Bulletproof vest manufacturers use the product as a raw material, stacking and processing it to produce protective garments that meet ballistic performance requirements.
According to U.S. Customs and Border Protection (“CBP”) laboratory analysis, article number KH3100A is a composite sheet composed of four layers: two lamination layers, and two textile layers. Each layer is laminated together with polyethylene plastic type material. The direction of the filament fibers in each textile layer is laminated 90 degrees to the direction of the filament fibers in the adjacent textile layer. The sample is laminated on one surface with a compact polyethylene plastic type material.
The sample has the following composition by weight: 91 percent polyethylene textile filament fibers and 9 percent polyethylene plastic. The weight of the sample is 117.60 grams per square meter. According to the CBP laboratory analysis, article number KS0101 is a composite sheet composed of four layers: two lamination layers, and two textile layers. The textile layers are bonded together with a urethane type resin/adhesive.
The direction of the filament fibers in each textile layer is bonded 90 degrees to the direction of the filament fibers in the adjacent textile layer. The sample is laminated on both surfaces with a compact polyethylene plastic type material. The sample has the following composition by weight: 93.9 percent polyethylene textile filament fibers and 6.1 percent polyethylene plastic. The weight of the sample is 129.44 grams per square meter.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N354186).