The country of origin of a tamper
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated September 29, 2025, you requested a country of origin ruling for marking purposes under Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304). Pictures and descriptions of the manufacturing processes were included in your submission. The item under consideration is a tamper. It is a hand tool used for tamping down asphalt, gravel, stone, and soil.
The tool is made of steel and consists of either a 10" x 10" or 8" x 8" base, with four reinforcement ribs attached to the top portion of the base, and a steel handle with a plastic grip applied to its end. The manufacturing process for the tamper begins in Vietnam, where raw steel is laser-cut into the base of the tool and the four reinforcement ribs. The base is then embossed with a steel die, and it is welded together with the four reinforcement ribs.
The fully formed tamper head is subsequently sent to China, where it is welded to a metal handle and the finished assembly is sandblasted and powder coated. Finally, a plastic grip is applied to the end of the handle and the finished tamper is then shipped to the United States.
Section 304 of the Tariff Act of 1930, as amended (19 U.S.C. 1304), provides that unless excepted, every article of foreign origin imported into the United States shall be marked in a conspicuous place as legibly, indelibly, and permanently as the nature of the article (or its container) will permit, in such a manner as to indicate to the ultimate purchaser in the United States, the English name of the country of origin of the article.
Congressional intent in enacting 19 U.S.C. 1304 was “that the ultimate purchaser should be able to know by an inspection of the marking on the imported goods the country of which the goods is the product. The evident purpose is to mark the goods so that at the time of purchase the ultimate purchaser may, by knowing where the goods were produced, be able to buy or refuse to buy them, if such marking should influence his will.” See United States v. Friedlander & Co., 27 C.C.P.A. 297, 302 (1940).
Part 134 of the U.S. Customs and Border Protection (CBP) Regulations (19 CFR 134) implements the country of origin marking requirements and exceptions of 19 U.S.C. 1304. Section 134.1(b), CBP Regulations (19 CFR 134.1(b)), defines “country of origin” as the country of manufacture, production, or growth of any article of foreign origin entering the United States.
Further work or material added to an article in another country must effect a substantial transformation in order to render such other country the “country of origin” within the meaning of the marking laws and regulations. A substantial transformation occurs when, as a result of manufacturing processes, a new and different article emerges, having a distinct name, character or use, which is different from that originally possessed by the article or material before being subjected to the manufacturing process.
See United States v. Gibson-Thomsen Co., Inc., 27 C.C.P.A. 267 (C.A.D. 98) (1940). It is our view that a substantial transformation occurs in Vietnam, where raw steel is laser cut into the square base of the tool and the four reinforcement ribs.
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N354390).