The country of origin of disposable nitrile rubber gloves
No revocation or modification of this ruling appears in the Customs Bulletin issues read here (Nov 6, 2024 through Nov 18, 2026), where CBP publishes most such actions. That is not confirmation that the ruling is still in effect. Confirm its status with CBP before relying on it (ruling on CBP CROSS).
Ruling text
In your letter dated October 5, 2025, you requested a country of origin ruling on disposable nitrile rubber gloves. A description of the manufacturing process and pictures of the products accompanied your letter. You outline scenarios where gloves are manufactured by utilizing hand molds to create the glove through a dipping process. There are two production scenarios, Specification A and Specification B. Specification A allows for raw materials of: LG latex and Synthomer latex originating in Malaysia.
Kumho latex originating in Korea. Titanium dioxide, zinc oxide, sulfur, accelerator BZ, blue pigment paste, antioxidant, purple pigment paste, accelerator EZ, and other auxiliary chemicals originating in China, Indonesia, Malaysia and other countries. Specification B allows for raw materials of: LG latex, Synthomer latex and other latex originating in Malaysia.
Titanium dioxide, zinc oxide, sulfur, accelerator BZ, blue pigment paste, antioxidant, purple pigment paste, accelerator EZ, and other auxiliary chemicals originating in China, Indonesia, Malaysia and other countries. The production processes that take place in Indonesia are the same for Specifications A and B and are as follows: 1. 1.
Cleaning - Hand molds are cleaned in acid wash tanks, water rinse tanks, roller brushes, and alkaline wash tanks to remove residual release agents, oils, and impurities, ensuring a clean surface for subsequent dipping. 2. Dipping - The cleaned molds are immersed in coagulant tanks, followed by sequential dipping in latex tank 1 and latex tank 2.
The coated molds then pass through coagulant ovens, latex oven 1, and latex oven 2, allowing the latex to evenly adhere and preliminarily form the glove shape through coagulation and drying. 3. Vulcanization - The preliminarily formed gloves on molds are processed in dehumidification ovens and main vulcanization ovens, where crosslinking reactions occur to achieve strength, elasticity, and durability. 4.
Aging - vulcanized gloves undergo cooling in cooling tanks, chlorination in chlorination tanks, neutralization in neutralization tanks, post-drip filtration in filtration tanks, silicone oil application in silicone oil tanks, and final baking in finishing ovens to enhance donning properties and surface smoothness. 5. Stripping and Inspection - gloves are stripped from the molds using a stripping machine, followed by visual inspection and automated counting. 6.
Packaging - the inspected gloves are boxed, packed into cartons, and palletized for shipment. When determining the country of origin, the substantial transformation analysis is applicable. See, e.g., Headquarters Ruling Letter (“HQ”) H301619, dated November 6, 2018. The test for determining whether a substantial transformation will occur is whether an article emerges from a process with a new name, character, or use different from that possessed by the article prior to processing.
See Texas Instruments Inc. v. United States, 681 F.2d 778 (C.C.P.A. 1982). This determination is based on the totality of the evidence. See National Hand Tool Corp. v. United States, 16 C.I.T. 308 (1992), aff’d, 989 F.2d 1201 (Fed. Cir. 1993).
The text above is an excerpt. The official ruling, with its letterhead, signature and any attachments, is on CBP CROSS (N354627).